Braun 5514 Motor Replacement
Andrew Kluckhuhn and 2 other contributors
Last updated on Aug 21, 2018
Views: 4.9K
View statistics:
- Past 24 Hours:
- 8
- Past 7 Days:
- 24
- Past 30 Days:
- 112
- All Time:
- 4,855
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 4 5
4 people have marked this guide "completed." Will you be next?
5 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓It is possible, though honestly rare, for the motor of a trimmer to fail for one reason or another. If changing the batteries does not restore functionality for this model, trying to replace the motor would be the next step.
What you need
Tools
-
-
-
Remove any attached trimmer heads by gripping and pulling away from the body.
Ask FixBot
-
-
-
Insert an opening pick between the top plate and the grey separator.
-
Slide the opening pick around the perimeter of the plate to release the hidden clips.
-
-
-
Remove the four 7mm Torx T6 screws attaching the grey plastic frame to the black plastic casing.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Team
IUPUI, Team S2-G2, Harley Summer 2018 Member of IUPUI, Team S2-G2, Harley Summer 2018
IUPUI-HARLEY-SU18S2G2
4 Members
24 Guides authored
