Introduction
Broken bra underwire can be a painful problem. Not only can it pierce skin, but it can ruin the support of the bra. Luckily, there’s a quick fix for replacing the broken wire with a new one. This manual will cover each step from removing the broken wire to using basic sewing skills to close up the hole.
What you need
-
-
-
-
Choose a thread that is a similar color to the bra.
-
Insert the thread into the eye of the needle.
-
Tie a double-knot.
-
-
-
Poke the needle through the bottom of the hole in the fabric.
-
Loop the needle through the top of the hole.
-
Guide the needle back through the bottom of the hole.
-
Repeat steps until the hole is closed.
-
-
-
Slide the needle under your last stitch.
-
Pull it through the stitch.
-
Tie a double-knot.
-
Cut the excess thread off.
-
Ask FixBot
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
University of North Texas, Team 2-6, Raign Fall 2021 Member of University of North Texas, Team 2-6, Raign Fall 2021
UNT-RAIGN-F21S2G6
2 Members
9 Guides authored
