Bose Soundlink Revolve Speaker Replacement
Ruoyu Han and 7 other contributors
Last updated on Sep 25, 2024
Views: 32K
View statistics:
- Past 24 Hours:
- 23
- Past 7 Days:
- 115
- Past 30 Days:
- 526
- All Time:
- 32,309
Comments: 19
6 comments on steps, 13 guide comments.
Go to guide commentsCompleted: 10 11
10 people have marked this guide "completed." Will you be next?
11 people have marked this guide "completed." Including you — great job!
Favorites: 1 2
1 person has favorited (and subscribed to) this guide. Will you be next?
2 people have favorited (and subscribed to) this guide — including you!
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs More Images
A few more images would make this guide's procedures crystal clear.
Missing Steps
Oops! This guide is currently missing one or more important steps.
Introduction
Go to step 1 ↓In this guide, details about disassembling the BOSE SOUNDLINK Revolve speaker are included for individuals who need instructions on how to troubleshoot and fix the speaker.
The Bose SOUNDLINK Revolve is a compact Bluetooth speaker that provides premium quality sound while still light and easy enough to carry. This specific example is not functioning as the speaker can’t be turned on. Thus, our team performed an educational disassemble of the device in order to troubleshoot the problem.
What you need
Tools
-
-
-
Use a plastic opening tool or metal spudger to remove the rubber mount from the bottom of the speaker.
Ask FixBot
-
-
-
Use a T10 screwdriver to remove the three 10 mm screws from the bottom of the speaker.
-
-
-
Unhook the ribbon conector that connects the bottom cover to the body, then remove the bottom part of the speaker.
-
-
-
Use a TR9 screwdriver to remove the screws from the top of the speaker, and then remove the top part of the speaker along with the motherboard.
-
-
-
Use a T10 screwdriver to remove the four 6 mm screws around the 2 speakers, and remove the speaker units from the body.
-
-
-
-
Remove the three 25.3mm screws from the bottom part of the speaker body with a T10 Torx screwdriver.
-
-
-
Use a spudger to pry apart the glued section between the speaker panel and the device.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
10 other people completed this guide.
Team
IUPUI, Team S1-G1, Wilson Spring 2019 Member of IUPUI, Team S1-G1, Wilson Spring 2019
IUPUI-WILSON-S19S1G1
3 Members
24 Guides authored
13 Guide Comments
Is it possible to buy a replacement subwoofer? Mine has been dropped and it's only the bass elements that sound distorted, thank you
Subwoofer with sound distorted at my revolver speaker
