Introduction
If the saw has a broken shoe plate, this guide will show you how to replace it. It is simply two screws that must be removed in order to remove the entire plate.
What you need
-
-
-
Remove the nine torx 15.875mm screws on the front of the jigsaw using a T-15 torx screwdriver.
Ask FixBot
-
-
-
-
-
-
Remove the 6.3mm hex screw on the left with a H.30 hex screwdriver.
-
Remove the reverse threaded 6.9mm black hex screw on the right with a H.40 hex screwdriver.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
Cal Poly, Team 22-9, Maness Winter 2017 Member of Cal Poly, Team 22-9, Maness Winter 2017
CPSU-MANESS-W17S22G9
4 Members
7 Guides authored
