Introduction
This guide for the Bissell CleanView Compact 3508 will give you step-by-step instructions to replace the base plate at the bottom of your vacuum. This piece simply covers up some of the vacuums internals to protect it.
What you need
-
-
-
With the vacuum in an upright position, press the latch on the rear of the spine to remove the handle from the vacuum.
Ask FixBot
-
-
-
-
Use a Phillips #2 screwdriver to remove the five 20.7 mm screws on the underside of the brush roll cover.
-
-
-
Use a pry tool or flathead screwdriver to disengage the two retaining clips securing the brush roll cover.
-
Remove the brush roll cover.
-
-
To reassemble your device, follow these instructions in reverse order.
Team
University of Memphis, Team 1-4, Sneed Spring 2025 Member of University of Memphis, Team 1-4, Sneed Spring 2025
UM-SNEED-S25S1G4
4 Members
84 Guides authored
