Bella 4-Slice Toaster Oven Outer Shell Replacement
Pierce Hampton and 3 other contributors
Last updated on May 5, 2019
Views: 807
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 9
- Past 30 Days:
- 49
- All Time:
- 807
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓Removing the black metal outer shell of the toaster is an important first step in replacing most major toaster components. This easy-to-follow guide makes it easy to remove and replace.
What you need
Tools
-
-
Spudger4.9
-
-
-
Remove five 11.6 mm Phillips #2 screws from the rear of the device.
Ask FixBot
-
-
-
Remove one 21.9 mm Phillips #2 retaining screw from upper-middle portion of door frame.
-
-
-
-
Remove four 13.7mm Phillips #2 screws from black plastic feet to separate the cover from the device.
-
-
To reassemble your device, follow these instructions in reverse order.
Team
Appalachian State University, Team S1-G4, Menagarishvili Spring 2019 Member of Appalachian State University, Team S1-G4, Menagarishvili Spring 2019
APSU-MENAGARISHVILI-S19S1G4
3 Members
60 Guides authored
