Free Shipping on Domestic Orders $75+

Introduction

This is a guide describing how to replace the 2024 Beats Pill battery. A battery replacement might be needed after unsuccessful troubleshooting, including trouble charging or a factory reset. This guide provides a step-by-step process to replace the battery and reassemble the speaker.

What you need

Step 1 Battery

Beats Pill 2024 Battery Replacement, Battery: step 1, image 1 of 2

Beats Pill 2024 Battery Replacement, Battery: step 1, image 2 of 2

Flip the speaker over.

Edit

Step 2

Use a hairdryer to lightly heat the bottom foot of the speaker.
Insert a spudger into the seam between the bottom foot and speaker body.
Pry around the perimeter of the foot until it fully releases.
Reapply adhesive to the foot before reinstalling it.

Edit

Step 3

Remove the twelve 8.6 mm T5 Torx screws that secure the battery cover.

Edit

Step 4

Beats Pill 2024 Battery Replacement: step 4, image 3 of 3

To remove the battery, pull on the tape material wrapped around the middle of it.

Edit

Conclusion

To reassemble your device, follow the above steps in reverse order.
For optimal performance, after completing this guide, calibrate your newly installed battery.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.