This translation was generated by a machine and has not been reviewed by a person yet. Speak this language? Review it.
BMW F31 2015 Display Replacement
ElPopel and 4 other contributors
Last updated on Sep 2, 2026
Views: 996
View statistics:
- Past 24 Hours:
- 4
- Past 7 Days:
- 34
- Past 30 Days:
- 151
- All Time:
- 996
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Better Introduction
Improve this guide by completing or revising its introduction.
Introduction
Go to step 1 ↓This guide shows the steps for “BMW F31 2015 Display Replacement”.
What you need
Tools
-
-
-
First, the entire trim panel beneath the display must be released.
-
No tool is needed for this; simply pull on the decorative trim with constant force, as it is only clipped into place.
-
The decorative trim must be released all the way to the right to the passenger seat and can then simply hang down by its cables.
Ask FixBot
-
-
-
Then, release the two T20 Torx screws and unplug the display upwards.
-
Be careful; the display is still attached by a connector that must be released from the back.
-
-
-
Follow the steps in reverse order to reassemble your device.
Cancel: I did not complete this guide.
One other person completed this guide.
