Introduction
The LCD screen is the main display of the Audiovox CDM-8910.
What you need
-
-
With phone in the flipped-open position, use a spudger to remove the four (4) rubber pads (one shown in red circle) located near the corners of the face with the LCD screen.
Ask FixBot
-
-
-
Use a small Phillips head screwdriver to remove the four (4) screws exposed by removed rubber pads.
-
-
-
Use a spudger to pry the front cover off of the phone, gradually working your way around the front face.
-
-
-
-
Use a spudger to lift away and remove the metallic frame (in blue).
-
Use the spudger to lift away the two electrical contacts (in red).
-
Use the spudger to lift away the speaker (in yellow).
-
-
-
This is what the rear of the LCD screen should look like before proceeding. Note all necessary connections are undone.
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team 3-24, Regan Fall 2010 Member of Cal Poly, Team 3-24, Regan Fall 2010
CPSU-REGAN-F10S3G24
4 Members
18 Guides authored
