Introduction
Replace your unresponsive screen to return display to your VivoBook.
What you need
-
-
-
With the screen closed, place your laptop upside-down with the front facing you.
-
Remove the five black 80mm Phillips #0 screws.
-
Remove the four black 50mm Phillips #0 screws.
Ask FixBot
-
-
-
Use a metal spudger to pry the bottom panel open.
-
Lift the back panel to expose the inside of the laptop.
-
-
-
-
Using a Phillips #0 screwdriver, remove the four 2mm silver screws located at each of the four corners of the screen.
-
-
Tool used on this step:Tweezers$4.99
-
Gently lift the screen up and over.
-
Use tweezers to remove the EX2 LVDS connector cable that connects the screen and the laptop.
-
Remove the screen.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Team
Eastern Washington University, Team S2-G3, Rowley Spring 2017 Member of Eastern Washington University, Team S2-G3, Rowley Spring 2017
EWU-ROWLEY-S17S2G3
4 Members
48 Guides authored
