Astro A20 Frame Replacement
Jasmine Yarbrough and 2 other contributors
Last updated on Jan 4, 2019
Views: 3.6K
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 19
- Past 30 Days:
- 84
- All Time:
- 3,636
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Needs More Images
A few more images would make this guide's procedures crystal clear.
Missing Steps
Oops! This guide is currently missing one or more important steps.
Introduction
Go to step 1 ↓A damaged frame on an Astro A20 can be replaced easily with a 60 mm extension, Phillips #1 screwdriver, and a new frame.
What you need
Tools
-
-
-
Lift the speaker.
-
Disconnect the white connector from the device.
-
Remove the wires connecting the frame shown by the yellow square.
-
Pull the black cord through the hole shown by the blue arrow.
-
-
-
-
Find the top 7mm J1 JIS head screws.
-
Remove the two 7mm J1 JIS head screws with a J1 screwdriver bit connected to a 60mm extension.
-
Pull the black cord through the frame.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
University of Alabama, Team S1-G2, Bedsole Fall 2018 Member of University of Alabama, Team S1-G2, Bedsole Fall 2018
UA-BEDSOLE-F18S1G2
4 Members
60 Guides authored
