Introduction
This guide is for replacing the internal lens assembly in your Arlo Pro VMS4430. This repair is necessary if the camera is blurry, cracked, or scratched. This procedure is intermediate and requires careful disassembly of the camera casing, which will expose the internal components.
Warning: Always ensure the battery is removed and the camera is completely powered OFF before beginning the disassembly to prevent short circuits or damage to the delicate internal electronics.
What you need
-
-
-
Remove the four 3.0mm screws using a Phillips #00 screwdriver.
-
Remove the camera module.
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
Purdue University Northwest, Team 3-5, Dieterle Fall 2025 Member of Purdue University Northwest, Team 3-5, Dieterle Fall 2025
PNW-DIETERLE-F25S3G5
4 Members
3 Guides authored
