Introduction
Instructions to remove and replace a damaged or non-functioning internal speaker.
What you need
-
-
-
Begin by inserting the plastic opening tool into the seam between the back and front of the case and carefully pry the back from the front.
Ask FixBot
-
-
Tool used on this step:Tweezers$4.99
-
Moving along the seam continue to pry the case apart.
-
-
-
-
The back panel should now be disconnected from the device. This provides access to the components of the device for repairing and replacing parts of the tablet.
-
-
-
-
-
Locate the soldering points where the wires have been connected to the circuit board.
-
-
-
Desolder the red wire the positive (+)
-
Desolder the black wire to the negative (-).
-
To reassemble your device, follow these instructions in reverse order.
Team
Eastern Washington University, Team S2-G6, Rowley Spring 2017 Member of Eastern Washington University, Team S2-G6, Rowley Spring 2017
EWU-ROWLEY-S17S2G6
3 Members
72 Guides authored
