Fix Your Stuff Community Store

Free Shipping on Domestic Orders $75+

Anbernic RG 40XXV Back Panel Assembly Replacement

What you need

  1. Anbernic RG 40XXV Back Panel Assembly Replacement, Back Panel Assembly: step 1, image 1 of 3 Anbernic RG 40XXV Back Panel Assembly Replacement, Back Panel Assembly: step 1, image 2 of 3 Anbernic RG 40XXV Back Panel Assembly Replacement, Back Panel Assembly: step 1, image 3 of 3

    • Remove the micro SD card located on the left and right sides of the device by pushing into the SD card slot and pulling the card out.

    • Unscrew all six 7.5 mm screws on the backside of the case using a 1.5 mm hex screwdriver.

    Edit

  3. Anbernic RG 40XXV Back Panel Assembly Replacement: step 2, image 1 of 2 Anbernic RG 40XXV Back Panel Assembly Replacement: step 2, image 2 of 2

    • Take apart the case by separating the front and back sides using an iFixit opening tool.

    • When using the opening tool, carefully pry open the case to avoid damaging the device.

    Edit

  4. Anbernic RG 40XXV Back Panel Assembly Replacement: step 3, image 1 of 2 Anbernic RG 40XXV Back Panel Assembly Replacement: step 3, image 2 of 2

    • Disconnect the battery connection cable by gently pulling it away with angled tweezers from the slot that connects the cable to the motherboard.

    • The cable connection to the motherboard is labeled "+BAT-" for easy identification.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Kristen Gismondi

Member since: 11/12/14

104,710 Reputation

266 Guides authored

Badges: 46

+43 more badges

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 11

Past 30 Days: 49

All Time: 341