Step 1 Rear Case



• Unplug the charger, power down the device, and remove the SD card before beginning.
• Insert an opening pick into the seam between the rear case and the screen assembly.
• Slide the opening pick around the perimeter, prying periodically, until the screen assembly begins to release.
• Insert an opening tool into the gap you created, and continue to pry periodically around the entire perimeter until the screen assembly fully releases.
• Be patient and don't pry too hard in any specific place. Excessive force may cause damage to the device.
Edit
1 comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2

• Remove the rear case.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

<iframe id="dozuki-embed-174235" src="https://www.ifixit.com/Guide/embed/174235/full" width="800" allowfullscreen frameborder="0"></iframe> <script>window.addEventListener("message",function(a){var b=document.getElementById("dozuki-embed-174235"),c=a.data[0],d=a.data[1];switch(c){case"setHeight":b.style.height=d+"px"}},!1);</script> <iframe src="https://www.ifixit.com/Guide/embed/174235" width="800" height="584" allowfullscreen frameborder="0"></iframe>

Preview