This translation was generated by a machine and has not been reviewed by a person yet. Speak this language? Review it.
Altyk le Petit PC RAM Replacement
INFOREA and one other contributor
Last updated on Sep 2, 2026
Views: 364
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 26
- Past 30 Days:
- 86
- All Time:
- 364
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Missing Details
Some of this guide's details are missing. Help users by adding tools, difficulty, or time.
Introduction
Go to step 1 ↓RAM replacement on the Altyk le Petit PC
What you need
Tools
-
-
-
First, disconnect your machine from the power supply, then turn it over and locate the 4 screws in the 4 corners under the machine. These are Phillips screws, and you will need a Phillips screwdriver with a long shaft.
Ask FixBot
-
-
-
Locate the small notch between the two Ethernet ports on the top. Use your fingernail or an opening pick to pry up and lift the machine's cover.
-
-
-
Lift the SSD and RAM active cooling system by grabbing it from a corner, so you can reveal the cooling fan connector and disconnect it.
-
-
-
-
You now have access to the RAM. It is a 16GB DDR4 SODIMM 3200MHz RAM stick, you can now replace it.
-
Once the RAM stick is replaced, you can reassemble your machine.
-
-
To reassemble your device, follow the instructions in reverse order.
