Altec Lansing BoomJacket 2 Motherboard Replacement
Zach Braaten and one other contributor
Last updated on Aug 30, 2018
Views: 1.4K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 11
- Past 30 Days:
- 58
- All Time:
- 1,356
Comments: 2
1 comment on steps, 1 guide comment.
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓Replacing the motherboard can help with bluetooth connection and control panel buttons issues.
What you need
-
-
-
Starting from any side, use your fingers to grab the black rubber sleeve and gently pull away from the speaker on both sides.
Ask FixBot
-
-
-
Using your fingers, grab the blue sleeve from one side and pull away from the unit.
-
-
-
At each of the marked pry spots, use the metal spudger to lift the speaker grill away from the case.
-
-
Tool used on this step:Tweezers$4.99
-
Use the tweezers to remove the six rubber stoppers. There are four in the middle and two on the sides.
-
-
-
Use the PH1 Phillips screwdriver to remove the six 12mm screws that lie underneath each rubber stopper.
-
-
-
-
-
The battery will be in the middle of the speaker when the case is open.
-
-
-
Pull firmly from both sides of the pin to disconnect the battery cable from the motherboard.
-
Pull battery up and away from speaker without catching any other components.
-
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
UW Tacoma, Team S1-G4, Cardinal Summer 2018 Member of UW Tacoma, Team S1-G4, Cardinal Summer 2018
UWT-CARDINAL-SU18S1G4
4 Members
48 Guides authored
1 Guide Comment
Where is the best place to purchase a motherboard for the Altec Lansing Jacket H20 4?
