Introduction
Use this guide to remove the head of an Afridev pump. Then follow the instructions in reverse order to install a replacement head.
What you need
-
-
Assemble the required tools, including the Afridev tool and crescent wrenches.
Ask FixBot
-
-
-
-
Perform a water test on the pump, by raising and lowering the handle a full 40 strokes. A properly performing pump will yield greater than 10 liters.
-
-
-
Loosen the bolt on front of the face plate with the Afridev tool.
-
Remove the plate from the pump by lifting it straight up.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
