Introduction
A step-by-step guide that illustrates the necessary precautions for replacing a battery for the Acer Iconia A100 tablet.
What you need
-
-
-
Start at any side of the tablet.
-
Begin to take apart the tablet with a plastic opening tool along the sides of the tablet.
-
Work your way around the tablet.
Ask FixBot
-
-
-
Remove the five 4 mm screws from the edges of the tablet with a Phillips #00 screwdriver.
-
-
-
-
Carefully separate the back piece from the device using a plastic opening tool.
-
-
-
Turn the tablet over so that the battery is facing upwards.
-
Remove the four 4mm screws located around the battery.
-
-
-
Use the tip of a plastic spudger or opening tool to gently push the connector head out of its socket.
-
Use your fingers or the flat edge of a plastic opening tool to lift the battery up and off of the device.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
Sam Houston State, Team 13-3, Blackburne Winter 2015 Member of Sam Houston State, Team 13-3, Blackburne Winter 2015
SHSU-BLACKBURNE-W15S13G3
1 Member
36 Guides authored
