Accessing Nokia 3100b DC Input
Sterling Fuentes and 5 other contributors
Last updated on May 7, 2024
Views: 1.6K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 17
- Past 30 Days:
- 104
- All Time:
- 1,605
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Introduction
Go to step 1 ↓The DC input of the Nokia 3100b is where the cell phone's charger plugs in to. This guide shows you how to access the input and replace it if it has become damaged.
What you need
Tools
-
-
-
Press the button on the back of the phone and slide the back panel off.
-
Remove the battery by pulling it from the phone.
-
-
-
-
Gently pull back the small metal frame holding the SIM card into place, and lift open the frame.
-
-
-
-
-
Tool used on this step:Tweezers$4.99
-
Use a pair of tweezers to remove the DC input from the base.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team 29-64, Johann Spring 2010 Member of Cal Poly, Team 29-64, Johann Spring 2010
CPSU-JOHANN-S10S29G64
3 Members
96 Guides authored
