Introduction
Pay attention to your device as you disassemble so that you can successfully reassemble later.
What you need
-
-
Lift the screw cover and remove the screw using a Phillips #0 screwdriver.
-
-
-
Push outwards on the clips to release the RAM stick. The stick should pop up at an angle.
-
-
-
-
Remove all of the screws from the bottom of the case.
-
If replacing the screen, remove the rubber feet to reveal two more screws.
-
-
Tool used on this step:Tweezers$4.99
-
Use tweezers to remove golden screw caps.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
University of North Texas, Team S6-G3, Thompson Fall 2018 Member of University of North Texas, Team S6-G3, Thompson Fall 2018
UNT-THOMPSON-F18S6G3
4 Members
13 Guides authored
