Introduction
This will show you how to open the AiO and upgrade RAM or replace hardrive
What you need
-
-
-
Remove screw cover plugs
-
Remove the two screws
-
Use prying tool/knife to remove rubber strip from the bottom
-
unscrew five small screws
-
User prying tool/knife to unsnap clips all around the edges
Ask FixBot
-
-
-
-
Remove the two screws holding hard drive
-
Slide out and replace.
-
-
-
Remove metal X which is the bracket or wall mount area.
-
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
