2021 Chevrolet Silverado Tail Light Replacement

Free Shipping on Domestic Orders $75+

Introduction

This guide demonstrates step-by-step on how to change your tail lights. It is a relatively easy process and with this alone, you can change the actual tail lights themselves and any light within the taillight.

What you need

Step 1 Tail Light

2021 Chevrolet Silverado Tail Light Replacement, Tail Light: step 1, image 1 of 3

2021 Chevrolet Silverado Tail Light Replacement, Tail Light: step 1, image 2 of 3

2021 Chevrolet Silverado Tail Light Replacement, Tail Light: step 1, image 3 of 3

Open the tailgate.
Remove the top and bottom T15 screws from each side of the tail lights.
Gently remove the tail lights by pulling outward.

Edit

Ask FixBot

Step 2

2021 Chevrolet Silverado Tail Light Replacement: step 2, image 3 of 3

Unplug the sockets and remove the reverse light bulb from the tail light.

Edit

Ask FixBot

Step 3

2021 Chevrolet Silverado Tail Light Replacement: step 3, image 3 of 3

Plug the brake lights connector.
Twist and secure the socket tightly.
Plug in the turn signal bulb connector. Twist and secure tightly.

Edit

Ask FixBot

Step 4

2021 Chevrolet Silverado Tail Light Replacement: step 4, image 3 of 3

Plug in the parking lights connector. Twist and secure the socket tightly.
Plug in the TURN SIGNALS connector. Please follow the same steps for the other side of the tail lights.
Make sure all the connections are plugged and tight. Also ensure that the caps are sealed.

Edit

Ask FixBot

Step 5

First, remove the reverse light bulb from the vehicle.
Then, connect the socket to the reverse light connector from the new tail light.

Edit

Ask FixBot

Step 6

2021 Chevrolet Silverado Tail Light Replacement: step 6, image 3 of 3

Lastly, plug the vehicle’s tail light socket to new tail light connector.

Edit

Ask FixBot

Step 7

2021 Chevrolet Silverado Tail Light Replacement: step 7, image 3 of 3

Gently push the tail light into the mounting position and use T15 screwdriver to tighten the top and bottom screws.
Repeat the same process for the other side of the tail light.