2011 Jeep Liberty Hood Replacement
Daniel Strode and 6 other contributors
Last updated on Dec 22, 2021
Views: 2.3K
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 19
- Past 30 Days:
- 88
- All Time:
- 2,266
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓Replacing a 2011 Jeep Liberty hood is a moderately simple task, requiring only a single tool. It is recommended to have two people complete the replacement, though it is not a requirement. There are no special skills required for this replacement. Replacing the hood is usually a cosmetic choice but may be needed if the hood is misshapen and will not longer function with the vehicle.
What you need
Tools
-
-
-
Open the hood of the Jeep by pulling the hood latch. This is placed right next to the driver's seat and to the left of the brake pedal.
Ask FixBot
-
-
-
Notice a latch located above the car's grill after popping the hood. Lift the hood by releasing the latch. After lifting the hood, notice a movable latch just above the wiper fluid container. There is a specific hole on the left side of the hood where you can hook the latch.
-
-
-
Identify the four bolts which can be seen towards the extreme left (2 bolts) and extreme right (2 bolts) underneath the hood.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Team
UMass Dartmouth, Team S1-G20, Sinclaire Spring 2021 Member of UMass Dartmouth, Team S1-G20, Sinclaire Spring 2021
UMASSD-SINCLAIRE-S21S1G20
2 Members
12 Guides authored
