Introduction
This guide will show you how to replace the battery in a 2008 Toyota Corolla. To get started, ensure the vehicle is parked in a safe place and turned off. Place the vehicle in park and engage the parking brake. Be sure to prepare baking soda mixed with water to clean the terminals.
What you need
-
-
Unscrew the bolt to loosen the negative terminal.
-
Remove the negative terminal from the battery.
-
-
-
-
Take the red cover off the positive terminal.
-
Unscrew the bolt to remove the positive terminal.
-
-
-
Disconnect the battery's terminals from the battery, and remove the old battery.
-
-
-
Once everything is clean, you can begin installing your new battery.
-
Install your new battery in the correct space. You will install the negative terminal first, then the positive terminal.
-
-
-
Ensure that every bolt is secured.
-
Start your car and let your car run for a couple of minutes.
-
Ask FixBot
Cancel: I did not complete this guide.
4 other people completed this guide.
Team
CSU Los Angeles, Team 4-84, Briggs Spring 2022 Member of CSU Los Angeles, Team 4-84, Briggs Spring 2022
CSULA-BRIGGS-S22S4G84
1 Member
2 Guides authored
1 Guide Comment
Just had my Toyota 2008 model battery replaced but the battery keeps draining. But when I put it on a different car it doesn't drain but it drains on mine. What could be the problem?
