Introduction
Use this guide to replace the power cord on a 1922 GE AOU fan.
What you need
-
-
-
Tip the fan to its side and remove the three size 8 screws using a 9/32 flat-head screwdriver.
-
Take the bottom plate off the fan and set it aside.
Ask FixBot
-
-
-
-
Once the switch is free, unscrew the two knurled nuts holding the wires in place.
-
-
-
Turn the switch over and unscrew the nut securing the wire with the 5/16 crescent wrench.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Texas Tech, Team 3-5, Rauch SU 2016 Member of Texas Tech, Team 3-5, Rauch SU 2016
TTU-RAUCH-SU16S3G5
2 Members
3 Guides authored
