01 | XY Frame Assembly
Murathan Araz and one other contributor
Last updated on Oct 11, 2018
Views: 3.5K
View statistics:
- Past 24 Hours:
- 3
- Past 7 Days:
- 10
- Past 30 Days:
- 65
- All Time:
- 3,514
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 4 5
4 people have marked this guide "completed." Will you be next?
5 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
What you need
Parts
-
×23030 Aluminium Extrusion - 354mm (Misumi) For sale from another site
Precision cut, high quality aluminium extrusions by Misumi
-
×23030 Aluminium Extrusion -320mm (Misumi) For sale from another site
Precision cut, high quality aluminium extrusions by Misumi
-
×8
-
×4
Tools
-
-
-
M8 x 40 screw for each corner. Insert T Nuts before M8 screws and do not tighten them now. Just to keep the frame in shape.
-
Blind L metal brackets for Z axis assembly should be inserted before M8 screws as well.
-
Insert two T-nuts for every corner in order to fasten the L brackets on the next step.
-
Do not forget to insert T Nuts for Y motor holder in back and LCD mount in front.
Ask FixBot
-
-
-
One Metal L Brackets for each corner.
-
Two M6x12 socket cap screws for each metal L brackets.
-
T-Nut insert for each bottom corner.
-
Printed Zaribo L brackets.
-
Misumi rubber foot for each corner.
-
M6x20 socket cap screw.
-
Misumi 3030 aluminium extrusion edge cover.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
