(Alienware X15 R2) Removing the bottom panel
Steven's PC Service and one other contributor
Last updated on May 4, 2023
Views: 2.9K
View statistics:
- Past 24 Hours:
- 2
- Past 7 Days:
- 23
- Past 30 Days:
- 85
- All Time:
- 2,909
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 4 5
4 people have marked this guide "completed." Will you be next?
5 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
What you need
Tools
-
-
-
Remove the six Phillips head screws
-
4X red: M2.5 x 7MM
-
2X Yellow: M2.5 x 7MM (Captive)
Ask FixBot
-
-
-
Using a spudger (with the assistance of the captive screws) gently pop any tabs on the front of the chassis. Now this doesn't come off quite like a 2018 Macbook Pro would, but once you pull the front up about an inch, it should slide forward pretty easily.
-
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
