ASUS ROG Strix G15 G513 Service Manual

Preview of the first page of this document

35 pages · 6.67 mb · PDF

This Service Guide provides comprehensive disassembly and assembly instructions for the ASUS ROG STRIX G15 (G513) series, including variants G513QY and ROG STRIX SCAR 15 (G533). Published in 2024 by ASUSTeK COMPUTER INC., this document is intended for authorized service technicians. **Device Overview & Specifications** The series features multiple models with slight variations in thermal modules, lighting (U-bar, LED modules), and internal chassis components. Specific identified variants include the G513 (standard), G513QY, and G533 (SCAR). The documentation highlights components such as the LCD panel, mainboard, thermal module, cooling fans, battery, M.2 SSD, DDR RAM slots, Wi-Fi card, and keyboard module. **Maintenance and Repair Procedures** * **Safety & Environment:** Requires a static-free environment (20-30°C, 40-70% humidity). Technicians must use grounded wrist straps and anti-static materials. * **Tool Requirements:** Specialized tools are required, including specific screwdriver types, plastic blades, plastic tweezers, thickness gauges (0.05-1.5mm), and magnetism boards. * **Thermal Maintenance:** The guide specifies the use of liquid metal (Thermal Grizzly Conductonaut) and thermally conductive elastomer (RV289) for thermal modules, noting that these require specific application kits, steel plates (e.g., AMD Cezanne/Renoir/GPU R21M), and careful cleaning with 95% alcohol and dust-free cloths. * **Bottom Case Disassembly:** Requires removing 10 screws (specifications vary by model, e.g., M2.5*9L or M2.5*12L). Technicians are warned to disconnect internal LED ribbon cables (LED R/L) before fully removing the bottom case to prevent connector damage. * **Component Assembly:** The guide emphasizes the correct routing of FFC (Flat Flexible Cables) and proper placement of sponge pads and Mylar stickers on the internal chassis. **Technical Data & Compliance** * **Publisher:** ASUSTeK COMPUTER INC. * **Date:** © 2024 * **Part Reference:** The