This document is the **Washing Machine Service Manual** for the **Kenmore** brand top-loading washing machine, **Model WT5680H*A**. Published for authorized service personnel, this manual provides comprehensive technical guidance for maintenance, installation, and repair.
### **Device Specifications**
* **Device Type:** Top-loading Washing Machine
* **Electrical Requirements:** 120VAC @ 60Hz
* **Inlet Water Pressure:** 14.5 – 116 PSI (100 – 800 kPa)
* **Spin Speed:** 1100 ± 50 RPM
* **Weight:** 146.5 lbs (66.5 kg)
* **Drum:** Stainless steel
* **Key Features:** Smart Rinse™ with Jet Spray, internal heater, time delay (1–19 hrs), magnet sensor lid interlock, auto power-off, and multiple cycles (e.g., Sanitary, Allergienem™, Power Cleanse, Wool).
### **Installation and Maintenance**
* **Leveling:** The unit must be installed on a firm, flat surface (within 1° of variation) using adjustable leveling feet.
* **Clearance:** Requires at least 4 inches (10 cm) of space behind the unit for the drain hose and 1 inch (2.5 cm) on sides.
* **Hose Maintenance:** New hoses are required for initial installation; hoses should be replaced every 5 years.
* **Drainage:** The drain hose must be secured to a standpipe at a height of 35–47 inches (0.9–1.2 m) above the floor to prevent siphoning and flooding.
* **Water Supply:** If pressure exceeds 116 PSI, a pressure-reducing valve is required.
### **Operational Guidelines**
* **Detergent:** Must use High-Efficiency (HE) detergent to prevent oversudsing and machine damage.
* **Bleach/Additives:** The system features an integrated bleach dispenser (max 1 cup capacity) and a dispenser drawer for liquid fabric softener and detergent.
* **Safety Protocols:** Always disconnect power before servicing. Specific components (Pump bracket, rotor, and heater) present shock risks while energized. Do not mix chlorine bleach with ammonia or acids.
### **Service Information**
The manual includes detailed sections for:
