iFixit - Answers With Device "philips 58pus8105 12"

philips 58pus8105 12: Blank Screen- sound works.

Thu, 31 Oct 2024 22:33:35 -0700

Hi,

In need of some advice/ help and having read so many helpful questions, answers and solutions, I wanted to reach out to see if anyone has any idea.

The screen has suddenly gone blank, I’ve tinkered with a few TV’s over the past year or so, so I’m comfortable taking the TV apart etc.

Backlights are fully working so they’re not the issue.

Unplug 1 of the T-Con board Cables and half the screen displays as normal, plug that back in and repeat for the other T-Con board Cable and the other side of the screen works and displays what you would expect.

Clean T-Con Cables and their respective sockets, plug both back in and no image displayed.

Am I correct in assuming this is a Faulty T-Con board or is it likely the Video board is at fault?

Any help would be really helpful

Regards

Shep

⟐ Commented October 31, 2024 at 22:33 MST

philips 58pus8105 12: Philips 58pus8505/12 flickering lines

Wed, 11 Sep 2024 12:39:29 -0700

Hi everyone, after about 2 minutes, stripes will start appearing in the center of the screen, which will blink every few seconds.
In the first few minutes after the cold start, everything is fine.

I replaced the T-CON with an unoriginal one from Aliexpress, it got worse, the stripes changed and were visible all over the bottom half.

Please help me, what else can I do?

⟐ Commented September 11, 2024 at 12:39 MST

philips 58pus8105 12: Why tv display is black?

Wed, 29 May 2024 04:09:23 -0700

The sound everything was fine by the display automatically went black but I can see light when turn of light in that room?

⟐ Answered May 29, 2024 at 4:09 MST

philips 58pus8105 12: Doesnt not show any picture eventhough the backlight ist working

Tue, 03 Dec 2024 10:47:33 -0700

First of all, I checked in a dark room with my flashlight to see if I could spot anything, but I didn’t. I reseated all connections, but nothing happened. I disconnected one side of the ribbon connectors from the T-con board to the panel, and half the display worked (showing a sharp picture with a few fine lines), while the other half turned white. When I disconnected the other ribbon and reconnected the previously disconnected one, it didn’t work, and no picture showed up at all. My guess would be a shot panel, but is there any chance it’s the T-con board?

ITS the CCPD-TC575-009 V1.0

I couldnt spot anything obviuos on the other Boards:

Head on:

News Pictures of the Red marked areas:

After plugging a News tcon in:

⟐ Commented December 03, 2024 at 10:47 MST

philips 58pus8105 12: Black screen then can only get half screen display

Thu, 04 Jun 2026 05:37:32 -0700

Hi I have an issue with my TV all of the screen is black when you remove one of the ribbon cables going from the t-con board to the screen half the screen comes on. I have noticed if you take the cable off and put it to the other side the other side of the screen then comes that side comes on then the opposite side goes black. I have tried other cables still same issue and even replaced the t-con board and still this issue persists can anyone help as it's got me confused

philips 58pus8105 12: Why is the TV overheating

Wed, 08 Apr 2026 05:35:13 -0700

Overheating

When you switched it on , it go off and on