iFixit - Answers With Device "iRobot Braava Jet M6"

iRobot Braava Jet M6: Why is it not spraying liquid

Fri, 07 Nov 2025 17:01:46 -0700

machine is brand new, just out of the box, and not spraying liquid. Yes, the reservoir is full, battery charged, front of jet clean….

⟐ Commented November 07, 2025 at 17:01 MST

iRobot Braava Jet M6: Irobot brava can't unlock buttons after wifi pw reset

Wed, 29 Jan 2025 01:27:00 -0700

Changed home wifi PW but the buttons on Brava m6 were pet locked. I can't get back into the my to unlock buttons. Need to press to buttons to reconnect to new wifi.

⟐ Commented January 29, 2025 at 1:27 MST

iRobot Braava Jet M6: Braava m6 not responding; not turning on and buttons don't do anything

Fri, 11 Oct 2024 04:47:48 -0700

I recently bought a used Braava Jet m6, and the robot does not respond. When I put the robot on the home base charging dock, for a few seconds, it lights up white and spins, and then it stops. When I press the "Clean" button, the robot doesn't respond. The same for all the other buttons. The wheels are not jammed and I already tried holding Clean for 30 seconds. It came with 2 batteries but they don't seem to work. The robot gets a little warm on the place where the cleaning pads are mounted. I have no idea what could be the problem, and I appreadiate any help I can get!!

⟐ Answered October 11, 2024 at 4:47 MST

iRobot Braava Jet M6: Why is it saying error47

Sat, 07 Oct 2023 17:16:15 -0700

what dose it mean when it says error47?

⟐ Answered October 07, 2023 at 17:16 MST

iRobot Braava Jet M6: Left wheel sticking, error code 10

Sun, 13 Apr 2025 11:11:08 -0700

The app says there's a repair and replacement guide for wheel packs, but I can't find it in the app. Anybody done this repair and care to share?

iRobot Braava Jet M6: Why my charging station output is just around 3v?

Fri, 15 Dec 2023 13:54:31 -0700

The output voltage of the charging base measured with a voltmeter is around 3v (2,88 actually). Should it be at least 14,5 as stated on its bottom?

I just read somewhere around here that 2v might be a voltage set to detect the mop. When it runs across the mop it like knows it’s docked there and should built up to 1.5 amps resulting in 14.5 volts or something like this. Maybe there’s something wrong on the PCB which I examined, cleaned and on which connectors I applied some good old WD40 (for contact) without any luck.

⟐ Edited by author December 15, 2023 at 13:54 MST

iRobot Braava Jet M6: Flashing clean light on the Braava M6

Tue, 26 Sep 2023 09:17:20 -0700

Hi, My M6 only response is while it is docked the clean button just rapidly flashes increments of 3, but only when docked.

What I have seen through the troublshooting is that it is updating, but it has been doing this well over a week now. I called customer service and they said that it was the battery and it needed replaced. I purchased an aftermarket battery on ebay but when I installed it the exact same flashing cleaning light while docked. Ive seen this problem being mentioned a few times on forums but have yet to see a solution solved for the issue. Any advice?? thanks!

iRobot Braava Jet M6: The lid holder (transparent plastic piece) is broken and lost piece.

Sat, 17 Sep 2022 22:27:59 -0700

The lid holder (transparent plastic piece) is broken and lost the piece.

To keep the lid closed, we taped the lid (as you know when the lid is open it doesn’t start any jobs.)

Could you help me get a piece and fix the lid?