but, when i connect the usb cable

the reboting is continue

even i diconnect the batttery with chraging

it's working

and keep rebooting againg with out battery mark


i fixed the screen problem

but i can't found battery problem

i have two of batter now one is original the other is new diffrence

안녕하세요 같은 한국인도 볼까봐 질문 올립니다

제가 아이폰5가 화면이 안나온걸 액정 교체해서 터치패널은 어떻게 고쳤는데

화면은 나오는데 이번에는

자꾸 재부팅이 됩니다

처음에는 배터리 연결쪽 문제인가 하고

배터리를 새롭게 사서

배러리를 구매해서

갈아줬더니

배터리가 부족하다는 표시가

잠깐 나오고

다시 무한 재부팅 입니다



인터넷에서 강제 부팅이 있다길래 일단 하긴 했는데

배터리 잠깐 표시 되고

애플로고 나오고

아이 튠즈에 연결 되었다고 표시만 띕니다


막상 아이튠즈를 실행시켜 복원하려면 또 재부팅이 되어

복원이 또 안됩니다;; 배터리를 샀는데 충전도 안되고

하드판이 고장난건지 원인을 모르겠습니다

I want to restore my iPhone because it boot loops and I want to fix this issue. I put it in DFU mode, iTunes recognizes it and begins with the update. Then the phone gets restarted so the update starts and it just boot loops again and I get unknown error (21). Please help.

-Update:

I tried again to restore it and it does nothing it says unknown error (11)

Thanks!

⟐ Edited by author September 20, 2024 at 0:36 MST

⟐ Edited April 18, 2023 at 1:24 MST

I faced a problem with my iPhone 5, where the battery was replaced. However, on the left side, the metal clips do not go back in properly. How do I fix this?

It seems like the metal clips are bent on that side, and a portion of the metal clips do not go into position and click down. This results in an opening, allowing for dust to get in. Is this bad for future use?

Thanks in advance.

⟐ Commented April 22, 2022 at 19:09 MST

I love the iPhone 5(Black) safe, so I'm thinking of installing a 5 safe on my iPhone 5 SE, can anyone help me?

⟐ Edited by author April 28, 2021 at 11:45 MST

However, after a few hours using it, the display just went black, just like that, suddenly. The screen was still lit up, but it was black. The phone still seemed to vibrate by using the mute unmute button or by keeping the home button pressed. I assumed there was a problem with the cables and that the connectors were not properly seated, so I opened the phone and reseated them (obviously disconnecting the battery before touching the display cables). After that, my phone never seemed to turn on again.

I can’t use my power button so the only way to turn on the phone is to connect it to a power source. There are two things that tell me it isn’t completely bricked:

1. It heats up when I connect it to a power source.
2. It is recognized when I connect it to my computer.

At first I thought it would be a display issue, but if it was a display issue, it would still light up, wouldn’t it? It doesn’t vibrate when I use the mute/unmute or the home button. Also, my old display doesn’t work either. So it’s unlikely that the issue is in the display. I also doubt it’s a battery issue. The battery is new. It heats up when it’s connected to a power source. The phone also doesn’t light up when I connect it without a battery. If I leave the phone in the open for a few days and connect it to my pc, it is not recognized. Only after I leave it charging for a few minutes and plug it in again it’s recognized, which makes me believe there is nothing wrong with the battery, since it seems to be charging and discharging normally.

Could it be a logic board issue? Please note that, since my power button is broken, I can’t hard reset the phone or try any other tricks that require the use of the power button. Also, I am currently not able to connect my phone to itunes, so that option is out too. Is there anything else I could do? I was thinking of taking it to a phone repair shop, but unfortunately, my country’s currently under lockdown, so no luck for me, at least for the next few weeks. Until then, I would like to try every option available to me. Replacing the logic board is not an option since I have data in here that I don’t want to lose.

⟐ Edited by author September 29, 2020 at 20:44 MST

I have seen similar posts, but not exactly my case, so I would like to ask for some advice.

I have an iPhone 5. Everything worked well except for the camera. I found another iPhone and took it apart as explained on ifixit to take out the camera. I put it in the other phone. I also changed the battery at the same time (new battery from ifixit).

Everything went well and has been working for some weeks.

Then the battery stopped charging. I noticed when it was caught in a boot loop when plugged. Tried with another battery (known to work), but it didn’t work in my phone. Tried to put it into recovery or DFU, but the phone was not recognized.

But the phone works perfectly with a charged battery, just the charging part doesn’t work.

So I thought that the Lightning port was not working. I followed the instructions on ifixit and switched the port with the one from the other phone (that worked). Result: the supposed faulty port works on the backup phone, the working port doesn’t work on my phone.

But when I plug the phone with a charged battery, it starts at least 50% of the time, so it seems like something works at least with the port, it’s just the charging that doesn’t work.

It must be something else than the port, but I don’t know what. In the other posts, I read things about U2 charging, but that seems too complicated for me. Do you think that there is something else I could try before giving up?

The backup phone I use for parts is locked (icloud), so I can’t just switch phones. But is there something else I could do? Use other parts?

Also: the new ifixit battery is completely dead and I cannot charge it. On my backup phone, I get into a boot loop when I plug it with this battery. But charging works with other batteries. As the home button doesn’t work, I can’t put it in recovery. I have tried to use reiboot, but the phone is not recognized. The phone does not restart when Reiboot is on, but it is not charging either (after 45 minutes). I use a mac or Ubuntu, so I haven’t tried other software that was recommended sometimes but only work on Windows.

Is it possible to give the battery a start somehow? Or is it possible to charge it inside the phone by physically forcing the phone not to start (remember: without home button and a power button not always responsive).

Thank you very much if you took the time to read everything! I just feel that it’s a shame to throw away electronic equipment that works well enough for a basic usage!

⟐ Edited by author April 01, 2020 at 8:01 MST

Google translate:

changed the power loop and sound control, after which the rear camera stopped working. what could be?

⟐ Edited January 29, 2020 at 6:49 MST

⟐ Commented January 27, 2020 at 19:35 MST

I was trying to remove a threaded screw and I accidentally poked the cellular antenna (the small sticky part on top of the loudspeaker in the bottom right of the phone)

The color is orange so I think I haven’t poked through fully.

Should I replace it? I need to replace the screen on it ASAP