⟐ Commented April 02, 2026 at 5:22 MST

⟐ Edited March 22, 2026 at 1:31 MST

As the title explains I got the notification stating I had an unknown battery part. I still have the original battery part so I'm unsure why this is popping up. After reviewing battery health it shows it's at "0%" charging and will do a restart after about a minute of it being on. This doesn't provide me a large window to trouble shoot the issue. I have also popped it open and disconnected and reconnected the battery to see if it was a possible cable connection error but the problem remains. Any ideas?

-Baker

⟐ Commented March 11, 2026 at 16:15 MST

I was given an iPhone 11 pro max and the previous owner said that it was working fine, and the next day the phone wouldn't turn on. it's worth mentioning that some days before, a message from the system popped up a liquid-detection alert but they didn't care. When I got it, I tried making the phone to enter diagnostic mode, tried to do a hard reset but nothing. My mind is really messed up, and I don't know any other possible things to try. The thing I suppose that might cause this whole issue is the charging PCB (because of that alert that the system popped up). Any possible things to try?

Thanks in advance!

⟐ Answered January 30, 2026 at 4:41 MST

⟐ Answered January 22, 2026 at 17:58 MST

I want to plug in the 11 Pro dock connector flex cable into 11 Pro Max. FPC fits like a glove, but I am not sure about pinout. I found some website with diode scale values which combines 11 Pro with Pro Max, so I guess they are interchangeable? I am just worried it’ll fry the 11 Pro Max motherboard.

I have 11 Pro Max that fails to connect to computer while in recovery mode. All my other Apple devices connect with no issues and can be restored, so it can’t be a driver or a specific computer issue (tried on 4 machines).

Said 11 Pro Max connects to Windows, macOS and Linux with no issues while in iOS 18.5, but phone simply doesn’t show up when in recovery mode. I tried to enter DFU for 2 hours straight, but to avail.

I’d greatly appreciate your help!

⟐ Answer edited December 26, 2025 at 12:09 MST

⟐ Answered December 12, 2025 at 16:33 MST

⟐ Answered November 13, 2025 at 14:39 MST

⟐ Commented November 11, 2025 at 8:35 MST

⟐ Answered October 28, 2025 at 9:27 MST

Is there any way to fix it without connecting the device to the pc ?because I don’t have one

⟐ Answer accepted October 28, 2025 at 0:55 MST

While doing a back glass repair I managed to rip both the small microphone sensor under the flash and the gold/white sensor to the right of it. I've gone through the data logs and found an error for a missing sensor Mic 2.

I've read from other forums that this is the Power Flex Cable. My question may be a bit silly but would the power button continue to work given this error?

The phone and power button both work as they should, but the phone will reboot after 2-3 minutes. Looking on mobilesentrix to get a replacement power flex cable, it should be OEM correct?

Any advice is appreciated!

⟐ Commented October 15, 2025 at 23:19 MST

⟐ Answered August 22, 2025 at 19:29 MST

⟐ Edited by author August 05, 2025 at 17:10 MST

the new charge port flex doesn’t have this piece of board with it. How do you transfer it over? Can you buy this piece of port separately? What does the board do on the flex? Thanks everyone

⟐ Answer accepted August 05, 2025 at 2:10 MST

⟐ Answered July 26, 2025 at 15:35 MST

⟐ Commented March 25, 2025 at 7:11 MST

⟐ Answer accepted March 19, 2025 at 2:41 MST