Yesterday morning, I have to experience a weird behavior of my ipad mini2. Day before yesterday night my ipad mini 2 was at 12% charge and I was trying to install the ios 11 (developer beta version), the download of the software happened in less than 10 mins and since my ipad was connected to a wall adapter, the system allowed to install the software (even though the charge is 12% but still connected to wall adapter).

I was seeing that the update was taking almost 20 mins with the progress bar showing the loading. I fell asleep and woke up after 4 hours to see that my ipad was showing an apple logo and was bit hot. (Not too hot rather).

After that I removed the cable and it showed me the connected to charger logo!!!

Looked like battery drained, but I connected to the charger and the ipad was showing that the device is charging (black screen with battery icon in middle with red line at the base of the battery icon - the screen before the ipad starts)

After 15 to 20 mins, the apple logo is appearing and AND STUCK AT THAT LEVEL AND MAKING THE DEVICE LITTLE HOT AS IT PROGRESSES and when removed, it is coming back to the connect to charger logo...

I do not want to have it charged for a very long time since not sure if it might affect the battery. I left the device untouched for a day and I even tried performing the above cases today morning and it is still the same.

I guess it should not be a hardware issue since, charging an ipad for 4 hours with device stuck at apple logo continuously (due to update interruption) should not affect the battery or charging IC for such a branded product like apple.

I cannot do DFU/Restore or do anything now since if I connect the device to macbook, it is showing the charging symbol in the ipad (black screen with battery icon in middle with red line at the base of the battery icon) and itunes and the mac is not detecting the device.

CAN YOU PLEASE HELP ME TO GET BACK MY IPAD TO WORKING CONDITION PLEASE?

⟐ Answered February 14, 2023 at 13:28 MST

Did I make the right choice? Any suggestions? A reply would definitely help me a lot.

Thanks

⟐ Commented August 11, 2024 at 14:48 MST

My iPad has been dropped multiple times in the past 3 years or so, although none of them has cause any kind of significant damage, until some time ago, my my iPad would suddenly has thin lines on the screen and experience some kind of image persistence. Most of the time, it was fixed when I restarted it, so I hadn't paid any attention to it. I thought it was a software glitch.

Yesterday, while playing games, it did this, but now, even when I restarted it, when I erased all settings, and even tapped on the back mltiple times, the lines didnt go away, although there is no more image persistence.

Everything works well, no lag, no bug, touch works fine, I can still play games or watch videos, the only problem are those lines.

On these pictures, you can see those large white lines and those small pixel like lines.

⟐ Commented July 20, 2023 at 7:21 MST

⟐ Answered June 30, 2020 at 4:39 MST

The digitizer is also sometimes completely unresponsive. Suddenly it responds to touch then.

I cleaned the contacts, restored the iPad in iTunes. Nothing helps. Any ideas?

Yes Brian and Jessa you were right. Wish I had read this before. I don't think I am the first one doing this wrong. I bought a new digitizer (third one) and followed the cable instructions very carefully. It works. This is really a delicate cable and this should be the first big warning before trying this repair. I have learned something and that is great! Some lessons cost more than others... :-) Hope you see my picture how the cable should be. Attach the top of the screen, THEN fold in the cable, THEN remove the adhesive from the bottom before closing it up.

⟐ Commented April 21, 2019 at 19:29 MST

⟐ Commented August 29, 2022 at 6:54 MST

https://discussions.apple.com/servlet/Ji...

⟐ Answered September 04, 2020 at 20:06 MST

So I realize this post is a bit preemptive since I don't actually have the iPad in my hands yet but I bought a broken 32 gb iPad mini 2 wifi on ebay the other day, and I'm trying to come up with a plan of action on how to diagnose what's wrong with it and how I can fix it.

All I know about the iPad is that it doesn't turn on, not sure if anything happens when you plug it in because the seller didn't really answer my question when I asked (but I assume if it were to just vibrate a couple times without powering on it's just a loose battery cable as is the case with iPhones). However, if this is not the case, what should I be looking at next? Could it be a faulty battery, or something else? And how would I be able to tell? Finally, if nothing else appears to work and it's possible that the ipad is water damaged, could anything be done about that to fix it?

Thanks in advance

⟐ Commented May 26, 2018 at 5:27 MST

⟐ Commented July 30, 2018 at 21:03 MST

I was wondering what I can do to power on my ipad mini 2 after I have replaced the LCD digitizer without removing the battery flex cable first? I read on the forum that you are supposed to put the battery cable on last after placing the LCD digitizer cable.

Also read that I may have to replace the fuse, which I'm not quite sure where it is located.

As of right now, the ipad is recognized on my laptop but, it doesn't power on.

⟐ Answer accepted May 23, 2017 at 4:46 MST

Update: I managed to turn it on for a few moments, the screen was very dark except around the home button where it was lit up more- it then switched itself off again.

⟐ Answer accepted March 09, 2020 at 4:57 MST

⟐ Commented September 16, 2016 at 8:51 MST

⟐ Answer accepted December 26, 2022 at 13:40 MST

1.I unplugged the battery first during disassembly

2.All wires and contacts that were "covered" are covered

Anyone have any ideas what I did wrong?

⟐ Answer accepted February 10, 2017 at 15:59 MST

However, when I've put it back together, it boots, back light turns on, but no image is on the screen - no apple logo or anything.

Once on, I can lock and unlock with the power button, and the home button works.

Any suggestions?

It doesn't seem to be the same problem as here: "Th screen stays black after a digitizer replacement"... because it's actually 'lighting up'.

I've done the usual hard reset with no luck

⟐ Reopened September 28, 2016 at 10:20 MST

⟐ Commented February 04, 2019 at 4:52 MST

I have an iPad Mini 2 (A1490) that I replaced the screen/digitizer/lcd on. When I was done repairing and connected the battery I tried turning it on and it showed the apple logo and then flashed to black and stay black.

Although it is black, the device is on because when I hold the home button I hear the siri tone and when I hold the power and home button to do a reset, it flashes the logo again and proceeds to turn on again but with a black screen the entire time. I would think if it was the backlight fuse issue that it wouldn’t show the screen with the backlight on at all, which it does for a second when the device is reset or powered on after the battery is connected.

⟐ Commented August 13, 2023 at 20:47 MST

So far the steps that I have taken are:

• Several soft resets
• Resetting all of the settings
• Opening the iPad back up to make sure all of the connections were solid
  

(nothing changed so I can assume this was true)

Currently the iPad is getting backed up, then it will start a factory reset and I am hoping that this will solve the issue, however if it doesn’t I would like to have a backup plan prepared!

Thank you all in advance!

Edit: Finished factory reset this morning still no change.

⟐ Answer deleted July 22, 2021 at 13:47 MST

We have a problem.

A customer brought an iPad 2 mini. I disassembled ipad, and I realized the touch screen connector was damaged. I removed the connector with solder iron, but one of the solder pad are missing.

what is the solution ?

thanks

Tibor

picture:

⟐ Commented August 26, 2019 at 19:14 MST

⟐ Answered December 16, 2022 at 1:54 MST