iFixit - Answers With Device "eMachines ET1831-05"

eMachines ET1831-05: Why does it run so slowly?

Sun, 25 Dec 2022 19:14:35 -0700

It runs very slowly and does not finish some tasks at all

⟐ Commented December 25, 2022 at 19:14 MST

eMachines ET1831-05: Machine will not turn on

Tue, 09 Feb 2021 04:59:59 -0700

went dead and will not turn on. power supply is good and switch is good. Can not find a mother board for it.

⟐ Commented February 09, 2021 at 4:59 MST

eMachines ET1831-05: Why my clock and date allways go to original setings of 2009?

Fri, 11 Sep 2015 19:16:37 -0700

time and date incorrect every time is buthup.

⟐ Answer edited September 11, 2015 at 19:16 MST

eMachines ET1831-05: My eMach will load up then shut down

Sat, 15 Aug 2015 18:13:34 -0700

So out of no when I started my emach it would load to my password then it will just shut down some times doesn't even make it to that please help!!

⟐ Answered August 15, 2015 at 18:13 MST

eMachines ET1831-05: Why can I not see anything on my screen.

Sun, 15 Mar 2020 13:44:22 -0700

My tower boots up fine and the cords are good, but earlier I rested pc start up to default due to it not being able to find a boot device now nothing shows up on my monitor

⟐ Answered March 15, 2020 at 13:44 MST

eMachines ET1831-05: I have two working desktop tower's both the same model,

Sat, 13 Nov 2021 04:28:38 -0700

Have two towers both same model l would like to combine the two into one, can you explain or point me in the right direction please

⟐ Answer deleted November 13, 2021 at 4:28 MST

eMachines ET1831-05: Startproblems after Windows10 upgrade

Wed, 24 May 2017 04:53:54 -0700

My Computer does not restart after sleeping. Since renewal of Windows10. Cache too full, therefore deleted. Now Problem to find bootmgr.

⟐ Answer accepted May 24, 2017 at 4:53 MST

eMachines ET1831-05: Green power Light keeps blinking

Thu, 30 Jan 2025 20:32:43 -0700

Green power Light keep blinking

⟐ Commented January 30, 2025 at 20:32 MST

eMachines ET1831-05: Can l savage any parts ... to use with eMachines desktop?

Wed, 17 Nov 2021 02:56:12 -0700

Can l savage any parts from a old Dell inspiration 1545 and have old gateway nv79 laptops besides hd to use with emachines desktop? Wireless card or Bluetooth module, anything, seems like l could use something ? Any ideas or comments appreciated, thanks

⟐ Answered November 17, 2021 at 2:56 MST

eMachines ET1831-05: Power LED doesn't light up

Thu, 03 Sep 2020 00:49:35 -0700

IHave a desktop emachines model 1831

The Power LED Doesn’t light up?

Can I buy that LED here?

⟐ Answer edited September 03, 2020 at 0:49 MST

eMachines ET1831-05: Turning off computor during factory reset

Fri, 07 Aug 2020 13:07:53 -0700

I turned my computor ofd during a factory reset and now nothing works and i dont have the disk

⟐ Answered August 07, 2020 at 13:07 MST

eMachines ET1831-05: Why wont my PC turn on?

Sat, 08 Feb 2020 14:49:06 -0700

The computer sounds like it's on but wont light up and the monitor wont connect

⟐ Commented February 08, 2020 at 14:49 MST

eMachines ET1831-05: Power supply not working

Sat, 16 Nov 2019 14:52:21 -0700

I can not turn on the computer.

⟐ Answer deleted November 16, 2019 at 14:52 MST

eMachines ET1831-05: How to use sd card

Fri, 20 Jan 2017 09:13:07 -0700

How to use sd card

⟐ Answer accepted January 20, 2017 at 9:13 MST

eMachines ET1831-05: No password od password disk.

Sun, 09 Oct 2022 05:52:23 -0700

How can I get into my computer that I got from my mom that she has no idea what the password is and she has lost the disk for the password reset. I really just want to do a factory reset on it.

⟐ Commented October 09, 2022 at 5:52 MST

eMachines ET1831-05: My eMachine Computer won’t turn on

Sun, 31 Jan 2021 23:05:29 -0700

I have the same problem. My Emachine Computer won’t turn on. So I disconnected the power cord from the power supply and the hard drive disconnected also. I held the power button for 60 seconds ….. I reconnected the power cord to the power supply …. the fan on the power supply works. When I reconnect the cord to the hard drive, the fan on the power supply stops running. Is this normal? When I push the power button, nothing happens. I then replaced the motherboard battery, repeated the above procedure …. when I reconnected the power cord, the fan on the power supply runs and I get a beeping sound. again, I plug the cable in the hard drive … the fan stops. I push the power button ON, and nothing happens. What next?

⟐ Commented January 31, 2021 at 23:05 MST

eMachines ET1831-05: hard disk space low, but C: and E: drives are empty

Fri, 30 Dec 2016 08:49:04 -0700

The hard drive has 3 partions, C: ( I think that has the restore on it)

D:( has HP Pavilion on it and takes up the whole partition)

and E: has nothing on it.

the computer is saying to free up space, but I set it to factory settings and still no room. How do I get the computer to use the other partitions?

⟐ Commented December 30, 2016 at 8:49 MST