iFixit - Answers With Device "eMachines Desktop"

eMachines Desktop: How do I fix my wireless internet

Sun, 05 Jan 2020 19:19:52 -0700

i don't know what happen to do but suddenly my wireless internet stopped working . i don't know what to do

⟐ Commented January 05, 2020 at 19:19 MST

eMachines ET1831-05: Why does it run so slowly?

Sun, 25 Dec 2022 19:14:35 -0700

It runs very slowly and does not finish some tasks at all

⟐ Commented December 25, 2022 at 19:14 MST

eMachines ET1831-05: Machine will not turn on

Tue, 09 Feb 2021 04:59:59 -0700

went dead and will not turn on. power supply is good and switch is good. Can not find a mother board for it.

⟐ Commented February 09, 2021 at 4:59 MST

eMachines Desktop: I can not get on to my email.

Tue, 09 May 2017 05:08:19 -0700

Sirr. I woud like a phone number to call some one fom E machine tto get my email started again. I needd to have the soft wwear tat is missing from my computer so at i can receive and sseend emai. Pop 3 is one of the items missing and may be it can be fixed today by down loading the soft wear needed. My Name is Mr. Walter Kingsley Email is ( wally5415@gmail.com )

⟐ Answer accepted May 09, 2017 at 5:08 MST

eMachines ET1831-05: Why my clock and date allways go to original setings of 2009?

Fri, 11 Sep 2015 19:16:37 -0700

time and date incorrect every time is buthup.

⟐ Answer edited September 11, 2015 at 19:16 MST

eMachines ET1831-05: My eMach will load up then shut down

Sat, 15 Aug 2015 18:13:34 -0700

So out of no when I started my emach it would load to my password then it will just shut down some times doesn't even make it to that please help!!

⟐ Answered August 15, 2015 at 18:13 MST

eMachines Desktop: Computer shuts off after a while of usage

Wed, 16 Oct 2024 13:33:48 -0700

My computer will shut off after a little while of usage. And i noticed that it only does it when i am on the computer and in the process of opening a file or loading a website, the usual activities one would use a computer in the first place! I just vaccumed out the inside of any dust bunnies, and left the panel open to get more air, and once again it did it again while i was opening a web site. Now i think it maybe the power supply. Any other suggestions?

⟐ Commented October 16, 2024 at 13:33 MST

eMachines Desktop: How can I erase virus on my eMachine pc

Thu, 19 Apr 2018 04:31:33 -0700

Is there an easy way to remove a virus from my computer without removing and replacing the harddrive

⟐ Answer deleted April 19, 2018 at 4:31 MST

eMachines Desktop: Should I upgrade my eMachines el1300g-02w to windows 10 and more ram?

Wed, 07 May 2025 18:30:26 -0700

Hello,

I have a emachines el1300g-02w which runs horribly slow, maybe I should have asked this question before I took action but I gave the pc to someone yesterday to upgrade it to windows 10 and add more ram so that it can run faster especially with MMO games. The guy then told me that there was no slot to put the GPU in nor a PCI slot, but he can still upgrade and clean the system. Did I make a good decision?

⟐ Commented May 07, 2025 at 18:30 MST

eMachines ET1831-05: Why can I not see anything on my screen.

Sun, 15 Mar 2020 13:44:22 -0700

My tower boots up fine and the cords are good, but earlier I rested pc start up to default due to it not being able to find a boot device now nothing shows up on my monitor

⟐ Answered March 15, 2020 at 13:44 MST

eMachines Desktop: How do I remove the hard drive?

Mon, 12 Aug 2013 23:13:57 -0700

How do I remove an emachines hard drive in order to replace it?

⟐ Answered August 12, 2013 at 23:13 MST

eMachines EL1852G-52W: Sir I had converted my disk from mbr to gpt using command mbrtogpt.exe

Tue, 22 Dec 2020 03:41:44 -0700

Sir i had converted my disk from mbr to gpt using command mbrtogpt.exe in cmd by looking in video from yotube...but he got the option of changing bios from lagacy to unify but i am not geting that opt in my emachine laptop bios nd now not able tp boot my lap

⟐ Answer accepted December 22, 2020 at 3:41 MST

eMachines Desktop: I get NO sound.

Mon, 21 Dec 2020 13:43:45 -0700

Where are speakers located.

How do connect a seperate speaker

⟐ Commented December 21, 2020 at 13:43 MST

eMachines Desktop: Whirring noise when under load?

Sat, 07 Jan 2017 09:52:06 -0700

What is the whirring noise that I hear intermittently? It comes from the DVD drive or hard drive when I open a large file. It varies in pitch and goes away about 5 seconds after it starts.

⟐ Answered January 07, 2017 at 9:52 MST

eMachines EL1852G-52W: no audio after reinstall of windows

Fri, 04 Sep 2020 14:05:29 -0700

no audio and troubleshooter says no speakers

have tested speakers in another machine all OK

tested in rear outlet and front headphone socket but still no sound

⟐ Answered September 04, 2020 at 14:05 MST

eMachines Desktop: Adding memory to may computer

Tue, 05 Jun 2018 00:40:33 -0700

Adding memory. How do I find out what memory sticks I need for an emachines ET1331G which has 4 mg of memory now. I would like to add more memory. Can anyone help me with this problem.

⟐ Answered June 05, 2018 at 0:40 MST

eMachines ET1831-05: I have two working desktop tower's both the same model,

Sat, 13 Nov 2021 04:28:38 -0700

Have two towers both same model l would like to combine the two into one, can you explain or point me in the right direction please

⟐ Answer deleted November 13, 2021 at 4:28 MST

eMachines Desktop: PC wont power up but I need to get stuff off the harddrive1

Fri, 03 Aug 2018 08:19:32 -0700

So I have an emachines desktop that I want to get rid of because it wont power up. I read that it's probably the power supply but I dont want to buy anything to fix it. I just want it gone. I did buy a new power cord but buying a new power supply for a computer I dont want seems useless. However, I have photos and stuff that I never backed up (yes dumb of me) that I want to get off of it. If I remove the hardrive, am I able to recover the info from the hardrive in the future? This might be a dumb question. But I am not very computer savvy.

⟐ Answered August 03, 2018 at 8:19 MST

eMachines Desktop: eMachines e625 kawg0 model won't turn on

Thu, 17 May 2018 21:22:52 -0700

Hello, I'm beginner specially in hardware , i wish that you can help me,

i downloaded the schematic and i made some checks : i tested the power cable it work , and continuity in power button , and now i don't now what i should test to find the problem because i can't understand the schematic

⟐ Answered May 17, 2018 at 21:22 MST

eMachines Desktop: My PC wont work!

Thu, 09 Nov 2017 18:04:11 -0700

When I turn it on there is a clicking sound and on the screen it has ...

Detecting array...

It does nothing else

⟐ Answer accepted November 09, 2017 at 18:04 MST