iFixit - Answers With Device "Wiko Pulp 4G Phone"

Wiko Pulp 4G Phone: (WIKO GETAWAY) won't turn on anymore, completely unresponsive.

Tue, 02 Dec 2025 04:54:29 -0700

Hiya,

The phone in concern is a Wiko GETAWAY, not a Pulp 4g Phone, but I can't find the phone on these forums.

Basically what happened is that I bought this phone second-hand with an error, namely that none of three lower buttons would work (Home, Back, and the tabs button). They would merely light up once when you switched the screen on, and then would darken again and be unresponsive.

So I decided to reboot the phone as to check if it had something to do with the cache, and I pressed Reboot after holding the power button for a few seconds. The phone switched off...and didn't turn on again.

It's completely unresponsive now, no buttons at all work, no recovery mode or bootloader, no lights when charging, no sounds, and it isn't recognized by the PC. I'd really like to solve this problem so I can at least get the phone back to the stage it was before the failed reboot.

Any help would be greatly appreciated!

⟐ Answered December 02, 2025 at 4:54 MST

Wiko Pulp 4G Phone: Wiko keeps turning on and off, can't fully boot it

Tue, 02 Apr 2024 03:54:46 -0700

Hey there, just wondering if this is a general problem and if people had this before.

I have an old Wiko Pulp, it was working as I transferred most important data, SIM etc to my new phone. I recently tried starting it again and now it boots, so I see the Wiko Label, it stays in that state for a few seconds, then seems to reboot, black screen and then the same Wiko Pulp logo again. This does not end until the battery is taken out.

I have already tested the battery, tried another improvised battery and charged it etc, same happens everytime. Doubt its the battery.

Any ideas and thoughts of what it could be are appreciated, as I have no clue.

⟐ Answered April 02, 2024 at 3:54 MST

Wiko Pulp 4G Phone: Techno c8 doesn't charge.

Tue, 09 Apr 2019 16:54:47 -0700

Techno c8 only charges with a particular charger. Have tried different chargers at stores but it won't charge. It just stays at the same percentage. So I'm worried is it a motherboard problem ? And if so how do I go about it. Could it be broken contacts? A guide on troubleshooting and repairing such related problems would be welcome. Also , there's a caveat. Why is it that the phone charges well with just that one particular charger but rejects all other chargers twice as powerful ? Could it be the USB cable of the charger? So what are my options? Sorry it's long but I really need help on this. Thanks in advance

⟐ Answered April 09, 2019 at 16:54 MST

Wiko Pulp 4G Phone: When I plug in the charger it say's the phone is overheating

Wed, 10 Dec 2025 17:34:45 -0700

Why does my phone keep telling me that and how can I repair it?

⟐ Answered December 10, 2025 at 17:34 MST

Wiko Pulp 4G Phone: Wiko pulp 4 won't stay charged long

Sat, 25 Dec 2021 07:34:45 -0700

Why won't my wiko pulp 4 stay charged long? And why is it so slow

⟐ Answer edited December 25, 2021 at 7:34 MST

Wiko Pulp 4G Phone: Bypass draw code without hard reset

Sun, 27 Jan 2019 17:58:05 -0700

Bypass draw password

⟐ Answered January 27, 2019 at 17:58 MST