iFixit - Answers With Device "Whirlpool Quiet Partner II"

Whirlpool Quiet Partner II: Whirlpool Gold Quiet Partner III Normal light keeps flashing

Wed, 01 Apr 2026 16:29:56 -0700

Normal light keeps flashing on Whirlpool Gold Quiet Partner III. Tried resetting by cutting electric. Comes back on. Is there a sequence that works to run diagnostics?

⟐ Commented April 01, 2026 at 16:29 MST

Whirlpool Quiet Partner II: Flashing light on clean

Sun, 11 Jan 2026 00:41:05 -0700

Flashing lights on clean dishwasher won't turn on but fir a sec then shut its self off

⟐ Commented January 11, 2026 at 0:41 MST

Whirlpool Quiet Partner II: How do I reset my Quite Partner II Dishwasher

Fri, 28 Nov 2025 09:56:40 -0700

My Quiet Partner II dishwasher is not working - the control panel is no longer lit up. I am having a difficult time trying to find out how to Reset it with the correct control panel button sequence for this model. I believe it is hard-wired so I have checked the breakers in my basement. I have pushed some buttons and the lights came on and off but not working. and When I push the cancel button it comes on -:O) instead of the start button and the washing selections. Help! :O)

⟐ Answered November 28, 2025 at 9:56 MST

Whirlpool Quiet Partner II: The Whirlpool Quiet Partner II Dishwasher will not turn on

Mon, 11 Aug 2025 11:00:13 -0700

I have a Whirlpool Quiet Partner II Dishwasher Model DU1101XTP83. I washed a load of dishes and everything seemed to work fine. When I went to unload the dishes, the green light above the "Normal" touch pad was blinking but the dishes were clean, no standing water in the bottom. I've read thru several of the other posts on this topic but none seem to be the same issue.

I checked the breaker, it was not tripped. I tried turning it off for several minutes. When the power is turned back on, the "Door Lock" indicator light next to the "Heated Dry" button, blinks for about 60 seconds or so, then stops and the "Normal" light starts flashing again. The reset sequences mentioned in the owners manual, as well as those in other posts have had no effect, the only lights that come on are the 2 mentioned.

I tested both door latch microswitches for continuity, they are good. The thermal electronic fuse is good as well although I havent tested for voltage because I'm not sure where to touch the ground probe without causing more damage. I've disconnected each wire to check for any burnt connectors and also checked the control board on both sides for any heat damage or poor solder connections. Everything appears fine. Any help would be greatly appreciated! Thank you!

⟐ Commented August 11, 2025 at 11:00 MST

Whirlpool Quiet Partner II: Dishwasher whirlpool quiet partner I push start button nothing happens

Sun, 20 Apr 2025 12:34:20 -0700

i was having problems with the door latch it is fixed working great i pushed the start button it only flashes green no noise or anything just flashes any ideas ?

⟐ Answer edited April 20, 2025 at 12:34 MST

Whirlpool Quiet Partner II: How do I reset my Quite Partner II Dishwasher

Tue, 24 Dec 2024 19:53:25 -0700

Mine is model DU1055XTVS0. It just ran and now nothing lights up. Hard wired. How can I reset it?

⟐ Answer edited December 24, 2024 at 19:53 MST

Whirlpool Quiet Partner II: Door latch lock not working

Tue, 17 Dec 2024 22:13:45 -0700

Why Dishwasher doesn’t latch or lock properly when closed, latch handle broken?

Naturally the dishwasher won’t run if not closed, latched or locked

⟐ Edited December 17, 2024 at 22:13 MST

Whirlpool Quiet Partner II: Cycle "light" flashing. Dishwasher won't start.

Mon, 05 Aug 2024 09:30:49 -0700

Whirlpool, Quiet Partner II

DU1100XTPS3 model

Unplugged power, waited 10 seconds, plugged back in, still won't start

"Light" cycle light is flashing rapidly

No other light illuminated

Dishwasher won't start

⟐ Commented August 05, 2024 at 9:30 MST

Whirlpool Quiet Partner II: My dishwasher not drain

Sun, 04 Aug 2024 17:45:08 -0700

My Whorlpool Quiet Partner II will not drain?

⟐ Answered August 04, 2024 at 17:45 MST

Whirlpool Quiet Partner II: Why is my whirlpool quiet ptnr II getting black oil spots on my dishes

Fri, 28 Jun 2024 10:33:37 -0700

My plastic dishes especially have black oil spots on them after washing. There are tiny spots on the door of my dishwasher as well. Anyone have this issue?

⟐ Answered June 28, 2024 at 10:33 MST

Whirlpool Quiet Partner II: Why is my Whirlpool Quiet Partner II not cleaning well.

Sun, 16 Jun 2024 15:11:00 -0700

I have a Whirlpool Quite Partner II- model DU1055XTVQ8. The dishwasher has a few issues. I am not sure if it is related or separate issues. The main one now is that the dishes aren’t getting cleaned and have a white residue. I used white vinegar pretty regularly to clean, but I don’t think the top or bottom sprayers have been cleaned. I tried to do that yesterday, but not sure how well I did. I have read about filters but can’t find where it is on this dishwasher. Any clue how to get to it?

⟐ Answered June 16, 2024 at 15:11 MST

Whirlpool Quiet Partner II: My DW detergent cover does not automatically open during washing.

Fri, 01 Mar 2024 10:57:11 -0700

My DW detergent cover does not automatically open during washing and does not drain.

⟐ Commented March 01, 2024 at 10:57 MST

Whirlpool Quiet Partner II: Whirlpool Quiet Partner II: Model DU1101 New control panel went blank

Fri, 17 May 2024 07:57:32 -0700

Several weeks ago, I had troubles with my control panel flashing lights. Paid online opinion said my control panel was shot. New control panel installed. Worked fine for about a month (but door mechanism seemed a little tighter). Now blank panel. Tried the circuit breaker reset and the 'normal+heated dry' button stuff. Nothing. I'm suspecting maybe door latch switches or fuse? Dunno. Somebody please give me insights. Thanks.

⟐ Answer edited May 17, 2024 at 7:57 MST

Whirlpool Quiet Partner II: The padlock button is lit up

Fri, 06 Oct 2023 16:24:48 -0700

Model DU1055xtvq8

The padlock button is lit up and no other button will work.

⟐ Edited October 06, 2023 at 16:24 MST

Whirlpool Quiet Partner II: Whirlpool Quiet partner III won’t start

Thu, 31 Aug 2023 06:51:33 -0700

able to select different cycles and lights work etc. but nothing happens when I press start :/

Door is shut all the way

⟐ Edited August 31, 2023 at 6:51 MST

Whirlpool Quiet Partner II: How do I reset my Imperial Series?

Sun, 27 Aug 2023 18:01:30 -0700

I do not have the “Heated Dry” option suggested.

⟐ Commented August 27, 2023 at 18:01 MST

Whirlpool Quiet Partner II: My dishwasher won't run the "pre-wash" cycles but will run others

Sat, 19 Aug 2023 10:33:44 -0700

I have a Whirlpool model DUL200PKB1. When I start a wash cycle, it will fill with water and then, when full, it sounds like it tries to start but then stops and drains. It will then refill and complete all of the other wash and dry cycles. I thought it was a timing issue with the circuit board and changed it but it is still doing the same thing. It doesn't matter which cycle I choose (light, normal, heavy, etc) it never does, what I call, the pre-wash. Not a huge problem except for the water it's wasting on filling and draining. Any suggestions?

Whirlpool Quiet Partner II: Dishwasher skips washing and only does dry heat already reset panel

Wed, 16 Aug 2023 13:16:47 -0700

I have reset the panel and all lights work but it does not wash the dishes, only will do the dry heat. The water is not coming out.

Whirlpool Quiet Partner II: How do I operate my dishwasher

Sun, 06 Aug 2023 12:41:31 -0700

My whirlpool dishwasher is recycling itself when in wash mode. I have a whirlpool quiet partner 2. How can I get it to complete recycle itself. All the other controls are operable.

⟐ Edited August 06, 2023 at 12:41 MST

Whirlpool Quiet Partner II: Why is my whirlpool quiet 2 dishwasher recycle itself again after I ru

Sat, 05 Aug 2023 18:16:40 -0700

Why does my dishwasher recycle itself.

⟐ Commented August 05, 2023 at 18:16 MST