iFixit - Answers With Device "Vtech Landline Phone"

Vtech Landline Phone: Why can’t I make a call but can receive

Fri, 03 Apr 2026 11:52:44 -0700

I am able to place a call but can’t hear it ring

⟐ Answered April 03, 2026 at 11:52 MST

Vtech Landline Phone: Can't hear caller but caller can hear me

Tue, 20 May 2025 22:03:15 -0700

I can't hear caller but they can hear me

⟐ Commented May 20, 2025 at 22:03 MST

VTech CS6719-2: My phone says to register HS see manual but can't find out how to regi

Tue, 17 Dec 2024 10:43:42 -0700

I de registered my VTech cs6629 but now I can not register it. It continues to attempt to register then says failed.

⟐ Commented December 17, 2024 at 10:43 MST

VTech CS6114: Brand new Vtech corded landline with answering system won't get a dial

Sat, 14 Sep 2024 05:06:20 -0700

I just purchased a new Vtech corded phone/answering system. MODEL CS5249. (This was not an option on the available list for this page) My current corded phone/answering system is an AT&T model. We still have analog phone service through Verizon...we do not use VoIP. I plugged the phone jack in and got a dial tone. I was able to make phone calls. I plugged the power cord in for the base /answering system and set the time and date then tried to make a call....dial tone disappeared??? When dialing anyway, I got as far as four numbers and was cut off with a message that the number cannot be dialed.... I plugged the old phone back in, worked perfectly. I tried the new phone in three other jacks in our home....same issue....no dial tone the second the base gets plugged in🤔🤔 Are Vtech phones incompatible with Verizon phone service?

VTech SN5107 Handset: I have the answer “on”, but messages can not be left

Sat, 17 Feb 2024 07:27:16 -0700

No one is able to leave a message???

⟐ Commented February 17, 2024 at 7:27 MST

Vtech Landline Phone: Power surge fried old base, pairing issues with new base: VTech LS6405

Fri, 29 Dec 2023 20:55:33 -0700

A thunderstorm blew the base to my cordless phone system. I’m convinced that the surge came through the telephone line as the VTech base was the only device to sustain damage even though there were other devices plugged into the same surge suppressor. I’ve purchased a new base set (they come with three handsets), and I’ve replaced the old surge suppressor with one that has a telephone In/Out to prevent something like this from happening again, but I’m having trouble figuring out how to pair my old handsets to the new base.

I always save my User Manuals, so I read through them for both the base and the accessory handsets. Nothing in those manuals addresses how to deregister a handset from a base without using the base. Using the old base is NOT an option as it’s completely nonfunctional in its current state. In addition, because the old base is completely fried, all of the old handsets are displaying an “Out Of Range Or No Pwr At Base” error message. No matter what button I press, I cannot get past this message into the handset menu.

If anyone has any suggestions on how to fix this I’d be super grateful. I really do not want to spend an additional $150 on new handsets over a pairing issue when the old ones work perfectly fine.

A side note: I’m actually pretty good with computer repairs and building/tearing apart a laptop or PC, and I just ordered the parts to repair the Lightning port and replace the battery in my iPhone and feel confident that I’m capable of doing that, but when it comes to repairing other electrical devices, my knowledge is pretty limited (for example, I have zero experience with soldering). I tried to see if I could find where the damage in the old base was but I couldn’t figure it out myself. That being said, I’m willing to learn if someone thinks they can walk me through how and where to look for the problem

⟐ Commented December 29, 2023 at 20:55 MST

Vtech Landline Phone: How do I deregister a VTech handset CS6609 if I don't have the base?

Fri, 29 Dec 2023 20:46:43 -0700

My VTech base got lost during a move. I have two Hand Sets that are registered to that Base. I bought a new base. I can’t register them to the new base and I can’t deregister them from the lost base. The handsets say ‘out of range or no power at base’. The handsets are CS6609 and the base is CS6649. The old base was also CS6649.

⟐ Commented December 29, 2023 at 20:46 MST

VTech CS6114: If my handset says handset one.. Does that mean there's a handset 2?

Wed, 11 Oct 2023 07:31:03 -0700

If my handset says handset one.. Does that mean there's a handset 2?

⟐ Commented October 11, 2023 at 7:31 MST

Vtech Landline Phone: Why are recent callers barely able to hear me on my Vtech CS6529-17?

Fri, 28 Jul 2023 17:52:24 -0700

With a nearly brand new battery, why would recent callers be barely able to hear me on my Vtech CS6529-17 cordless phone?

VTech CS6719-2: Handsets of Vtech Doorbell IS7121 Either out of range

Fri, 19 May 2023 16:01:55 -0700

Is there a quick code to reset the handsets of the vtech doorbell IS7121? 8 out of 10 handsets are either out of range or no power at the base. I followed the instructions in the user manual, none of which worked.

⟐ Commented May 19, 2023 at 16:01 MST

VTech CS6114: caller on the other side of the call cant hear me

Sat, 06 May 2023 18:22:25 -0700

Everytime i call some one that can here me but i can here them and i don't know how to fix it

⟐ Answered May 06, 2023 at 18:22 MST

VTech CS6719-2: I have Cs6719-2 handset, no base, can I connect it to new base

Fri, 31 Mar 2023 10:14:13 -0700

The base and one of the 2 handsets are broken. Can I connect the remaining handset (cs6719-2) to a new base?

VTech SN5107 Handset: Handset does not show any information

Thu, 02 Feb 2023 09:45:28 -0700

The handset on my cordless phone has stopped showing any thing on it. It shows a very little at the edge.

⟐ Answered February 02, 2023 at 9:45 MST

VTech CS6114: I can’t turn on the charger to charge it, why not?

Sun, 22 Jan 2023 11:23:27 -0700

The charger won’t turn on, I tried fixing it with my Pro Tech Toolkit, but can’t.

⟐ Commented January 22, 2023 at 11:23 MST

Vtech Landline Phone: no line shows up on two handsets

Sat, 22 Oct 2022 23:33:25 -0700

"no line" shows up on my vetch handset 1 as well as handset 2. . I have plugged and unplugged. . . .tried everything. . .unhooked jacks, etc.

⟐ Commented October 22, 2022 at 23:33 MST

VTech CS6114: Landlines phones vtech cs6114

Tue, 24 May 2022 08:51:25 -0700

I have dail tone on phones but cant call out or no one can call in why?Anne K

⟐ Answered May 24, 2022 at 8:51 MST

VTech CS6114: How to sync two phones same model

Wed, 11 May 2022 12:34:17 -0700

Had a two phone vtech 6.0 ,dropped one and broke it,bought another of the same model ,How do I get it to work with my existing one.

⟐ Answer deleted May 11, 2022 at 12:34 MST

Vtech Landline Phone: My phones say no home line. Phone company says no outages

Mon, 14 Feb 2022 21:44:04 -0700

tried unplugging all phones and replugging no luck

⟐ Answer deleted February 14, 2022 at 21:44 MST

Vtech Landline Phone: Can I repair the docking station for a Vtech CS-6729-3

Thu, 10 Feb 2022 18:37:33 -0700

My CS-6729-3 docking station won't charge the phone. It has fallen on the floor and won't charge the handset.

⟐ Commented February 10, 2022 at 18:37 MST

Vtech Landline Phone: V-Tech 9111 handset problem

Wed, 02 Feb 2022 19:56:28 -0700

I have VT 9111 900 MHz cordless wall phone. When i try to use a replacement handset even with new batteries i get continuous red flashing lights. If i put the same batteries in my current handset, they are fine, so it’s not a charging issue. What do the red lights mean?

⟐ Commented February 02, 2022 at 19:56 MST