iFixit - Answers With Device "Ventilator"

Respironics RemStar LX: Phillips Respironics Replacement Blower...

Sun, 10 May 2026 06:29:49 -0700

I have a Phillips Respironics REMstar LX, Model 1000920, Serial #1444891, for which I need a Blower Assembly Kit, #622115. Where/from whom may I find this part? Thanks in advance.

Phillips Respironics Dreamstation 2: Blower motor replacement steps

Sat, 17 Jan 2026 11:07:16 -0700

Can someone show me step-by-step instructions to remove the blower motor to be replaced with a new one?

eVent Inspiration: event medical inspiration ls power board manufacturer

Mon, 05 May 2025 00:00:27 -0700

Who is the manufacturer of event medical inspiration ls power board?

⟐ Answered May 05, 2025 at 0:00 MST

Ventilator: PLV-100 Repair Technician Consultation Needed

Thu, 01 May 2025 16:37:43 -0700

My wife's used a PLV-100 since we were teenagers (that makes over 30 years now). We now have a few of them, and a bunch of spare parts, but nobody to service them and, unfortunately, we've not found any others she can breath on due to the uniqueness of the non-invasive ventilation setup she uses. (I don't want to go into that at the moment). Now, my goal is not to have to rely on anyone so I'm trying to find a professional to consult with to learn the ins-and-outs of the thing. I have the manual, and have taken the things apart, but no experience with actually servicing or repairing them.

Now, I've spent my years as a caregiver for her making things for her. She's 'everything' to me. I do electrical engineering and mechanical design, I even design and 3d print custom non-invasive ventilator nosepieces/headgear for her, designed our own feeding pump system with controls, etc. (Everything's approved by high up doctors and even local hospitals). BUT... a pro's a pro!

I'm willing to pay for the help and experience. Thanks.

(I'm not sure if we can be contacted through here, so please feel free to email me at jaggz.h {over yonder at} gmail.com

Thanks again; we're getting desperate as these things haven't been serviced in a long time, since Philips-Respironics terminated support of the line.

⟐ Commented May 01, 2025 at 16:37 MST

Newport Ventilator e360T and e360Tplus: Problem with e360T ventilator

Tue, 14 Jan 2025 09:33:59 -0700

I have a problem with the e360T ventilator, the machine has a Pressure sensor error. I replaced the analog board with a new one. The machine worked for 20 minutes and then appeared again Pressure sensor error. Please help me resolve this error Thank you very much

My email address: ducthanh@meditronicvn.com

Thank you very much

THANH

Vitalograph Alpha: Reversed or No Measurement

Mon, 06 Jan 2025 18:36:24 -0700

I am trying to perform a test but measurement is reversed. What do I do.

Puritan Bennett 840: How can I fix upper screen getting red

Wed, 18 Dec 2024 15:57:48 -0700

upper screen getting red or sometime it black

Drager Savina 300: My safety valve keeps on failing during device check

Thu, 14 Nov 2024 21:08:47 -0700

My safety valve keeps on failing during device check on start up, however I am finding it difficult to access the safety valve itself in order to test it's diaphragm.

Ideas?

Bird 3800: I want to know about distributors in Japan.

Mon, 07 Oct 2024 21:13:55 -0700

I want to know about distributors in Japan.

I received a request from a hospital to repair the same model of blender.

Newport e360: The Flow sensor is not passing safety check

Thu, 29 Aug 2024 03:37:33 -0700

The Flow sensor is showing error and it couldn't pass pre use test

Air Liquide Ventilator: config admin password or software?

Mon, 12 Aug 2024 12:34:25 -0700

config admin password or software?

⟐ Commented August 12, 2024 at 12:34 MST

GE Engstrom Carestation: Why self test keeps on fail?

Fri, 26 Jul 2024 22:07:32 -0700

I have a issue with this machine . the preesure relif valve and the expiratory valve keeps on faling on self test.

i have replaced the valves but the problem still same .

and one one problem sometimes the flow sensor passed and some times shows fail .

need help !!!!!!!!!!!! urgent!!!!!!!!!!!!!!

Maquet Servo-i Ventilator System: Is there any reason this vent can not stay on in standby mode?

Wed, 22 May 2024 04:36:51 -0700

Hello, I had a question about the leaving the servo-i vent plugged in an outlet and screen left on 24hrs until its ready for patient use. By doing so, will this harm anything? For example, like the O2 cell

Phillips Respironics Dreamstation 2: Broken electircal input plug

Wed, 07 Feb 2024 04:05:11 -0700

It appears I have broken the part on the bottom where the the electrical plug slides into. Anyone else broken this?

Mindray SynoVent E5: Ctrl Module Selftest Error

Tue, 09 Jan 2024 01:08:57 -0700

How can to fix this massage ?

⟐ Commented January 09, 2024 at 1:08 MST

Penlon AV-S: AV-S monitor Cant turn on

Thu, 16 Nov 2023 04:36:54 -0700

I have AV-S monitor Anesthesi. But cant turn on. How can i fixit. Or u can fix it

Puritan Bennett 980 Ventilator: Toubleshooting procedure - compressor failure

Tue, 08 Aug 2023 14:02:52 -0700

Hello,

i'm looking for the service manual or any manual addendum for the compressor troubleshooting.

My ventilator show an alarm, and i need to verify the status of the compressor.

Ohmeda 7000: I have Ohmeda Excel 210 machine with ventilator supply power issue

Wed, 26 Jul 2023 16:37:45 -0700

I have Ohmeda Excel 210 machine with ventilator supply power issue, we don’t know the exact voltage that’s why we can’t solve its problem, I think its voltage supply is changed, also ventilator is not working because we install this ventilator on 220V instead of 110V

Technician checked this ventilator and told us that he can’t resolve it unless same ventilator is not here, he will resolve this issue by comparison of both ventilator’s supply and resolve its voltage

Ventilator: I am getting high RR rate.

Mon, 27 Mar 2023 10:50:03 -0700

Sir,

We are setting RR in range of 10-12. But it exceeds to 30-50. Although self tests are Okay and breathing circuit is new.

Bio-Med Crossvent Intensive Care Transport Ventilator: PIP won’t read.

Thu, 23 Mar 2023 17:48:00 -0700

Hello! I work for St Joes peds/ neo team. We’ve been having an issue with our PIP reading intermittently. It’ll read the peep and sounds like it’s giving breaths while powered on but wont read a PIP. Do you have any suggestions? We’ve had our biomed look at it and they sent us a loaner but the loaner has done it as well. It’ll work normally then do it again. It’s happened at the bedside twice with two different vents. Thank you so much!

⟐ Commented March 23, 2023 at 17:48 MST