iFixit - Answers With Device "Triumph Motorcycle"

Triumph Motorcycle: P 1135 traction control disabled

Sat, 26 Oct 2024 19:01:38 -0700

how to repair Traction control disabled due to malfunction (P1135) triumph bonneville T120

⟐ Answered October 26, 2024 at 19:01 MST

Triumph Motorcycle: Why bike wont start

Sat, 30 Nov 2019 08:04:43 -0700

I have a 2013 thunder bird 1600cc sometimes starts with no problem, and other times power to gages and fule pump but when i hit the starter nothing not even a click?

⟐ Answer accepted November 30, 2019 at 8:04 MST

Triumph Motorcycle: Cranks but will not start?

Wed, 17 May 2023 15:52:46 -0700

I have a 2013 triumph Thunderbird Storm that cranks but will not start I have replaced the battery plugs coils map sensors under tank checked lines on map sensors checked injectors(they do work) checked negative ground inspected start button control switch on handlebars I'm stumped at this point and begging for help I live to far from a dealer to take it to them and do not have the money for that anyway this is my only means of transportation any and all advice will be helpful and tried

⟐ Commented May 17, 2023 at 15:52 MST

Triumph Motorcycle: gas leaks from carb

Sat, 03 Aug 2019 08:50:25 -0700

when i turn the fuel on gas well leak out of the air box

⟐ Answered August 03, 2019 at 8:50 MST

Triumph Motorcycle: 2001 955st wont start no spark

Sun, 05 Aug 2018 14:41:12 -0700

i cant get spark, motor turns over but wont get spark where do i start to find problem

⟐ Answered August 05, 2018 at 14:41 MST

Triumph Motorcycle: P1690 code (CAN-BUS) on my 2015 Triumph Bonneville. What to check 1st?

Sat, 13 Dec 2025 21:00:14 -0700

Bike won’t start. Lights turn on but fuel pump and speedometer won’t. Battery is new and tests fine. Problem started 2 weeks ago with pump and speedometer turning on and off intermittently when I turn the key. Then when I would finally catch the “on” I’d hit the start button and bike would turn over. During riding, speedometer would flicker off and on but fuel pump would be steady with sporadic sputtering. One day I went to start bike and nothing. Question is: has anyone experienced anything similar and how did you go about fixing the issue?

⟐ Answer accepted December 13, 2025 at 21:00 MST

Triumph Motorcycle: faulty clutch,won't disengage,cable not broken

Wed, 22 Nov 2023 19:14:13 -0700

I own a 1974 Bonneville 650 which hasn’t been ridden since last year. I have kept it clean’ stored in a shed in my yard. Anyway I took it out the other day and started it, but when I put it in gear it conked out because it was in gear, with the clutch handle pulled in…….I opened the little slotted cover on the gearbox and could see the cable wasn’t broken.I appreciate any advice

⟐ Answered November 22, 2023 at 19:14 MST

Triumph Motorcycle: replace shift pedal on 2013 speedmaster

Mon, 01 Jun 2020 11:49:19 -0700

need to replace shift pedal. is there a skematic

⟐ Answered June 01, 2020 at 11:49 MST

Triumph Motorcycle: T595 won't start when hot

Sun, 25 Aug 2019 08:32:17 -0700

Triumph t595 won't start when hot

⟐ Answered August 25, 2019 at 8:32 MST

Triumph Motorcycle: putting battery bak an fuse blew no star now

Mon, 05 Jun 2017 01:28:53 -0700

How do I replace the fuse that blew this is a brand new Triumph 6 60 MY first brand new bike I was putting battery in when was a spark and now I have no power... real stressed don't no wot to do.... please anybody help me.... DEVESTATED

⟐ Answered June 05, 2017 at 1:28 MST

Triumph Motorcycle: Triumph Sprint 1050 st motorcycle starting problem

Mon, 28 Apr 2025 16:06:54 -0700

Bike wont start, it's getting fuel but not sure about battery cranking amps.

Tried a jumper pack and still not enough?

Wiring is intact also.

Other suggestions please

Triumph Motorcycle: Replaced oe muffler with after-market

Sat, 12 Jun 2021 03:30:34 -0700

Need reprogram number for ecu for after -market

Triumph Motorcycle: 2007 tiger 1050, needs replacement of chain slider.

Tue, 07 Nov 2017 00:40:05 -0700

to fit the new chain slider does the swingarm need to be removed ???

Triumph Motorcycle: Setting and Synchronizing carburetors

Thu, 06 Jul 2017 07:52:39 -0700

I have a 1968 Triumph Daytona 500 with 2 carburetors. I am new to Triumph bikes. I have rebuilt, adjusted and synchronized the carbs according to the manuals and forums of information found. Ground the valves to seat properly and re-gasketed the top end. I do not seem to have power to get above 40-50 mph. One mechanic suggest I replace the carbs for new ones. In researching replacements, I noticed the replacements appear to have a float in one with inlet feed and the other no float without feed. The ones on my bike have a feed for each carb with float in both with an equalizing tube bridged between them. Is a float in each one with a feed to each one the original design? Will a float in each one affect the synchronization of them? The manual says to pull one spark plug and adjust opposite carb for smooth idle and then the other. I have also read not to do that if you have changed to electronic ignition, which I have a new Boyer System on it. Everything appears to run just fine except power to get highway speed.

Triumph Motorcycle: One-off Triumph Driveshaft Thruxton

Sat, 01 Oct 2016 17:26:07 -0700

Can I build an air cooled Triumph Thruxton with a Triumph driveshaft?