<![CDATA[iFixit - Answers With Device "Teenage Engineering OP-Z"]]> https://www.ifixit.com/Answers/Device/Teenage_Engineering_OP-Z?rss=yes en-US Sat, 04 Apr 2026 22:33:57 -0700 <![CDATA[Teenage Engineering OP-Z: How do I remove the keyboard for cleaning?]]> I was hoping that there was a way to clean underneath the buttons themselves. The board itself seems to be sealed in. Is there anyway around that? Thank you

]]> https://www.ifixit.com/Answers/View/657086/How+do+I+remove+the+keyboard+for+cleaning https://www.ifixit.com/Answers/View/657086 Sat, 19 Sep 2020 22:01:49 -0700 <![CDATA[Teenage Engineering OP-Z: Where do I get replacement encoder dials?]]> Encoder dials don’t seem to be available and I’m missing two thanks to lending it out, please help

Update (09/12/2022)

3D file for replacement encoders with space for a 6mm DIAMETRIC magnet https://drive.google.com/file/d/1-O0g11s...

⟐ Commented July 07, 2024 at 23:11 MST

]]> https://www.ifixit.com/Answers/View/713397/Where+do+I+get+replacement+encoder+dials https://www.ifixit.com/Answers/View/713397 Sun, 07 Jul 2024 23:11:22 -0700 <![CDATA[Teenage Engineering OP-Z: The front buttoms pcb (op-z)? Where do I find?]]> Hello guys, i wish you are all really well!

I have a question, after coming all the way to Brasil with my op-z looking for someone to fix it, which i found just in Berlin for now.

My Op-z is 40% fixed by now (it was problems of dirty inside, humidity, etc) and now, Tom, which fix for SchenidersLaden with his team, told me that i should find some Front Buttoms Pcb for it, to continue the fixing - ‚cause some of them are not working properly, and this bothers me while composing.

Do you guys have some of them - used or new - to sell or give it to me or know where i could find it?

This would help a lot not just my artistic carreer, but my lufe as a whole.

I keep searching from here,

Wishing again all the best for your

Kindly

Pedro Máia

Obs.: By the way, the op-z module and the cables that i got from you are working pretty well! Just the cable of charging the op-z that lost all it‘s skin, so it‘s like crude now, with the silver cables inside appearing - could it be harmful for me?

]]> https://www.ifixit.com/Answers/View/928153/The+front+buttoms+pcb+(op-z)+Where+do+I+find https://www.ifixit.com/Answers/View/928153 Thu, 27 Nov 2025 06:51:04 -0700 <![CDATA[Teenage Engineering OP-Z: My faceplate / topcase became warped, looking to replace it.]]> Sitting on the shelf, the plastic topcase warped, to the point that there were ghost-presses on many of the buttons. I attempted to correct it, but the warping was too extensive + one of the circular cutouts on the rear (for the jacks) cracked in the process of trying to un-warp it. I couldn't find any means of acquiring this part, in order to replace it though.

]]> https://www.ifixit.com/Answers/View/814024/My+faceplate+-+topcase+became+warped,+looking+to+replace+it. https://www.ifixit.com/Answers/View/814024 Fri, 15 Sep 2023 15:42:40 -0700 <![CDATA[Teenage Engineering OP-Z: Need a replacement Pairing button]]> Can you provide a replacement Pairing button or a complete back panel?

]]> https://www.ifixit.com/Answers/View/764758/Need+a+replacement+Pairing+button https://www.ifixit.com/Answers/View/764758 Tue, 17 Jan 2023 16:35:09 -0700