iFixit - Answers With Device "Surgical Equipment"

Verathon Glidescope Titanium: Verathon glidescope titanium working

Tue, 17 Jun 2025 20:11:13 -0700

How does it works

⟐ Answered June 17, 2025 at 20:11 MST

Valleylab Force FX-C: show generator code 4 instead of 1

Thu, 08 May 2025 22:43:21 -0700

hey, fellas need help with vellylab force fx c esu as it shows the generator code 4 instead of 1 . after calibration, the error 212 remains constant.

⟐ Commented May 08, 2025 at 22:43 MST

Electrosurgical Generator: Why is the neutral plate of Electrosurgical generator Keep alarming?

Tue, 02 Apr 2024 08:37:35 -0700

Neutral plate error showing on the screen even after I checked the plate it's self and the internal connection. As soon as you connect the neutral plate, it seems to work correctly but after few seconds the error will occurred.

⟐ Commented April 02, 2024 at 8:37 MST

Berchtold Operating Table: Operon D830 - No Drive Function

Thu, 06 May 2021 19:03:36 -0700

I have an Operon B830 with no drive function. Upon pressing the drive function both the service light flashes (intermittent) and the limit switch light flashes. Anyone familiar with or seen this issue before? Every other function seems to work.

⟐ Answered May 06, 2021 at 19:03 MST

Olympus OEV Monitor: Why is the unit shuts down after 3 minutes?

Thu, 26 Mar 2026 05:00:39 -0700

Why is the unit shuts down after 3 minutes? And Fan is not running.Voltages present in the Fan Connectors.

Alsa Excell 350 MCDSe: Excell alsa 350 has error 39 during self test

Tue, 02 Dec 2025 03:57:09 -0700

Dear all

The unit is giving error 39 . As it is Error in the internal dummy load used during the self test .

Could any one help to repair this fault

Thank you

Laparoscopy: Laparoscopy video system Hologic Omni 4K

Wed, 16 Apr 2025 05:19:32 -0700

I have a problem with hologic Omni 4K

Vidro system

2001 could no t start recording

Please try again

i ‘m looking for the service password

Thank you

Miguel Chavira

Karl Storz Laryngoscopy: Replacing Battery in CMAC Pocket Scope

Fri, 28 Jul 2023 16:40:57 -0700

My battery is losing charge quickly and Storz will not service as it's older and they no longer support it. How can I replace the battery?

⟐ Commented July 28, 2023 at 16:40 MST

ConMed System 7550: foot control tones, but there is no output

Thu, 15 Dec 2022 06:46:13 -0700

If I use the pencil, I get output, if I use the foot control, there is none, no cut, no coag. it tones as if it is working, there is no errors, but my sim shows no output.

Steris 5085: How to calibrate heights limit on the table

Wed, 24 Aug 2022 06:29:42 -0700

Hi, I need to calibrate height limit for 5085. Shroud get disengaged and keeps braking welding

Steris 5085 SRT, Surgical Table

⟐ Edited by author August 24, 2022 at 6:29 MST

Surgical Equipment: Code for Drager Julian

Tue, 10 Aug 2021 10:19:54 -0700

I need a code for a Drager Julian to enable me change from German to english

OR Solutions ORS-1075HS 1058HS Hush Slush: Auto Stir only goes up/down once then stops

Mon, 07 Jun 2021 12:49:01 -0700

Auto Stir option goes up/down once on power up then stops and switch light goes out. Shouldn’t this continue to cycle up/down while switch is on?