I can see the light is on but it is not very bright in comparison to my other eden pure heater. Is this a bulb issue? I am extremely handy but before opening the box I am looking for knowledge. The unit was manufactured in 0907.

⟐ Commented January 22, 2025 at 22:05 MST

When The heater is in use,I have noticed that the wire right at the prong connection is getting really hot.I have done electrical work and know this is very bad.It is a 16 GAWG cord,should replace it with a 14 GAWG cord?

⟐ Edited December 27, 2023 at 15:27 MST

⟐ Answer accepted October 31, 2016 at 13:19 MST

⟐ Edited March 11, 2024 at 11:00 MST

⟐ Commented November 22, 2024 at 21:55 MST

⟐ Answer accepted November 07, 2023 at 18:27 MST

⟐ Answer accepted October 31, 2016 at 13:21 MST

⟐ Answer accepted June 08, 2016 at 12:34 MST

Newly added

⟐ Answer accepted May 07, 2018 at 4:44 MST

⟐ Commented February 06, 2026 at 9:46 MST

⟐ Answer edited February 04, 2026 at 18:42 MST

⟐ Commented January 23, 2026 at 23:00 MST

⟐ Commented January 07, 2026 at 13:21 MST

I have used for years the fellowes footrest heater. The other day, it overheated and the inline fuse "burnt". It must be a one-time fuse because even after cooling down, it doesn't release warm air, but it does "heatless" air.

Here is the picture

-edited -

I checked the heater element. I do not see anything burnt.

One of the thermal fusers looks a little bit dark. Here are some pictures:

I do not have any DMM. Is it needed to continue with the repair?

⟐ Commented March 12, 2025 at 8:16 MST

I few years ago I was given this tabletop heater, and I never had the opportunity to tested until now. You can synchronise the heater with your phone and other devices. No problem with that. It turns on and off but, the air that is coming out from the heater is actually cool air. I tried everything including turning on and off, resetting the device and deleting the app.

it seems to me this is an issues that I may involves the thermostat.

Any thoughts on how I can fix it?

Thanks

⟐ Answer edited February 02, 2025 at 0:21 MST

My DeLonghi Bend Line HFX65V20 stopped responding. I took it apart. There is a component that catches my attention, I do not know what it is or if what it has on the outside is normal or it has melted. I need help. I leave you photos so you can study it .

Summary:

Do you think that component is in bad condition?

What is that component?

Regards,

David

Hi @jayeff,

Thanks for you answer.

Let’s me show the other board:

At first glance I cannot identify problems here. The bz1 was my hope, because I do not have the expertise to discover the problem myself if it is a component that externally seems good.

Any idea??

Thanks again,

David

Hello everyone,

I was about to ressemble the Heater and I notices that the board makes a little sound when shaken. After touching, shaking, close-hearing and think it comes from inside the TOS1 (RBS31) the black box near the BZ1 boozer.

Is it a transitor? (for me to know first)

Is it suppose to have a loose piece inside?

Is it possible to be the cause for the whole board not to function?

Is it possible to verify/change this little box?

Or maybe avoid the whole board and make the heater work directly? (I doubt it but ask anyway)

EDIT:

The box is something like this:

https://www.mouser.it/datasheet/2/209/jo...

Tilt sensor.

Thanks a lot,

David

⟐ Answer accepted October 06, 2024 at 11:32 MST

⟐ Answer accepted October 04, 2024 at 8:36 MST

What is the specification of the that metal part the plastic knob fit on? Is metric? Is it easy to ask for it at a department store?

Here is what happened to the knob. It broke over time.

Here is the company, model, and item number. Is there an easy way to find a manual for this space heater.

⟐ Answered December 27, 2023 at 12:44 MST

⟐ Edited March 11, 2024 at 10:45 MST

what is it?

measures 119.8v ac on both sides.....

comes off of the board here:

its normal path from pcb ... usually mounted behind the fan....

wtf?

⟐ Commented November 21, 2022 at 21:26 MST