⟐ Commented February 01, 2026 at 14:18 MST

The cassette door is stiff to fully open when a cassette is present, but fine when empty. Extensions on the plastic window, latch onto the metal parts of the cassette tray. So much force needs to be applied that I think the plastic parts of the window will wear out even more and fail. The workaround is to use a thumbnail to get some added force on the cassette. Fiddly and not customer pleasing. Otherwise rock the door backwards and forwards about eight times to tease the cassette out.

This problem occurs with all my cassettes. I have tried filing 0,5mm off the top of one (scrap) cassette (adjacent to the recording protection breakouts), so the sprung clips do not hold the cassette so firmly (customer isn't jogging with it!) but no improvement.

Other info: I replaced the counter belt and adjusted the door catch tension, both successfully.

Any solution to this niggling problem or are all old Walkman like this?

⟐ Commented January 15, 2026 at 4:03 MST

⟐ Answer edited December 10, 2025 at 17:59 MST

⟐ Answer edited October 09, 2025 at 21:57 MST

I tried swabbing the player head, and it got rid of the buzz for a short while and then it would come back again.

The model is WM-FX193.

What might be the problem here?

⟐ Commented September 10, 2025 at 14:21 MST

I added a video showing what the display is showing from the FX453...

And yes, I had it fully put back together with all the ribbon cables connected and still same issue.

⟐ Edited August 14, 2025 at 2:23 MST

1. charging error. it sometimes charged sometimes not charged just like the cable had problem. never had this problem for years since 2009
2. the date became --/--/--. never happened once although years not use.
3. after fully charged, it's working. all the music files available & can be played. JUST the volume up malfunction. volume down is working. now I'm worried, volume has down to 14 after I pressed two three times when confirming the volume button malfunction. HELP.

⟐ Answered May 13, 2025 at 3:02 MST

The below photos show the board which I couldn't immediately identify any issues, with the exception of what may be excess flux????

Any advice would be incredibly helpful, thank you in advance!

⟐ Commented May 10, 2025 at 7:37 MST

I tried the same tape on my deck and it doesn't hiss at all.

What could be the problem? (Also, the belt is new and I tried cleaning the volume button, still hissing)

(Sorry for my grammar, English is not my first lanaguage)

⟐ Answered December 15, 2024 at 9:33 MST

⟐ Answer accepted December 05, 2024 at 19:20 MST

I am now stuck on a sound quality issue along with the volume meter problem. I only listened to it for half a song before the belt snapped initially, so I don't know if it's my tinkering or a consequence of the Potentiometer. I've cleaned the head, pinch wheel and capstan system, but not demagnetized yet, though I doubt this is the issue.

The potentiometer is spinning round and round instead of the set limit it's supposed to have, and clicks on or off jumping to random volumes and channels. What is it's part number? does any one have the Manual for the WM-4? Would it be worth finding and using contact cleaner on it?

I would love any advice you have. Regards

⟐ Answer accepted November 22, 2024 at 12:10 MST

⟐ Commented November 08, 2024 at 17:45 MST

I have a Sony walkman which I have had for years and now the input jack is loose. I contacted sony and they directed me to United Radio in New York who said they could fix. Well they just called me and told me the input jack is no longer available from Sony so they are unable to fix it and they can only obtain parts from Sony but alluded that after market parts do exist and alluded that can be repaired. I have no idea what my step is. I can't find any parts for the walkman online. Not sure if the input jack is proprietary or not. Can any one point me in the right direction? Thank you

⟐ Edited September 26, 2024 at 11:14 MST

⟐ Commented September 11, 2024 at 20:55 MST

brand newster enquiry here :-)

Would anyone here have or no where to get small parts for a Sony Sports WM F107? Mine which Im trying to repair as a birthday gift for my daughter is missing the radio tuning panel and cover and the lid for the external AA Battery. There are other sports Walkmans without the solar that look similar so Sony may have used identical parts on some models. Ive tried eBay for a parts only example however the prices are simply outrageous there. We also tried the Walkman restoration project in Sweden? (from memory) but they did not have any. Otherwise how does one find an STL file for this so as to get 3D printed parts made?

Thanks in advance

Ed

⟐ Answered March 14, 2024 at 20:51 MST

Recently acquired a silver Sony Walkman WM-4. Installed new batteries, new belts and lubed gears. When pushing play sometimes it it will start and sometimes not. With the back off I can rotate the silver metal gear by hand and it will eventually begin to work. When it does come on the sound through the headphones sounds like your underwater. I can't seem to find any information showing where to adjust the speed on this model.

Thanks for any help or advice

⟐ Answered November 27, 2023 at 0:51 MST

Can anyone tell me what the component thp601 is please. On the board it has a few coloured bands round it like a resistor

Thanks

⟐ Commented November 18, 2023 at 21:28 MST

⟐ Answered March 08, 2023 at 21:19 MST

Badger

⟐ Edited November 05, 2023 at 22:36 MST