iFixit - Answers With Device "Shark Navigator Repair"

Shark Navigator Repair: Can I replace the cord on my shark vacuum

Sun, 20 Jul 2025 16:16:20 -0700

The cord on my shark lift away, the prongs are about to break. Can I replace the cord?

⟐ Commented July 20, 2025 at 16:16 MST

Shark Navigator Repair: If the vacuum is not turning on, what should I do?

Wed, 28 Aug 2024 12:27:53 -0700

I turned on the power button but the vacuum is still not starting.

⟐ Answered August 28, 2024 at 12:27 MST

Shark Navigator Repair: How to Get a toddler sock from the hose

Sat, 20 Dec 2025 07:52:18 -0700

A toddler sock is stuck in the hose of a shArk lift away kind of by the handle part we took it apart however the hose cannot be removed we can see the sock. Was wondering how to remove the hose we took off all the crews but the hose could not be removed....

⟐ Commented December 20, 2025 at 7:52 MST

Shark Navigator Repair: My vacuum is not picking up dirt, what could be the problem?

Sun, 15 Oct 2023 19:08:04 -0700

I've tried cleaning out the filter but I'm still having problems.

⟐ Commented October 15, 2023 at 19:08 MST

Shark Navigator Repair: Why is my brush roll and indicator not working?

Fri, 19 Jul 2024 06:50:44 -0700

My indicator light stays off and the brush roll doesn't function. I removed the roll and disassembled it. No blockages, everything clean, wires are good, position switch working properly. Performed wiring checks, beyond possible high resistance through the circuit board no issues noted. Can find no information on how much voltage should be being supplied to the brush roll. Or what proper resistance readings should be. Checked voltage at where the brush roll connects to the base. Vacuum on 7V with or without pressing the latch switch to imitate the bottom being connected unsure what proper voltage should be.

⟐ Answered July 19, 2024 at 6:50 MST

Shark Navigator Repair: How much does a motor cost for a Shark Navigator vacuum?

Tue, 29 Aug 2023 02:07:17 -0700

How much does a motor cost for a Shark Navigator vacuum?

⟐ Answered August 29, 2023 at 2:07 MST

Shark Navigator Repair: Roller brush doesn’t turn - Shark Lift-Away brand

Wed, 14 Jan 2026 10:12:48 -0700

I have a Shark Lift-Away, the brush has stopped turning. I have cleaned it, etc.

⟐ Answered January 14, 2026 at 10:12 MST

Shark Navigator Repair: Shark won't stand up.

Fri, 12 Jan 2024 10:30:19 -0700

The silicone(?) collar that holds the floor nozzle into the tube that connects with the upright section of the body has broken. It is the part that keeps the two connected. Is there a cheap way to find or make a replacement?

The collar that is broken has two tabs to keep it in place. One has broken. The other tab doesn't quite do the whole job. It is a flexible translucent piece that looks like it could be made of stiff silicone.

⟐ Answered January 12, 2024 at 10:30 MST

Shark Navigator Repair: Vacuum won't let me push or pull on carpet.

Mon, 01 Apr 2024 03:08:56 -0700

I was using my Navigator Lift-Away Pro on the carpet and it was working fine then the red light came on and I couldn’t move it. After cleaning I tried it again soon as I put it back on the carpet it did the same thing again it seems the brush stops spinning.

⟐ Answered April 01, 2024 at 3:08 MST

Shark Navigator Repair: The canister is empty after I vacuum a room

Wed, 18 Feb 2026 20:03:11 -0700

When I vacuum a whole room the canister is empty. But the floor is somewhat clean

⟐ Answered February 18, 2026 at 20:03 MST

Shark Navigator Repair: I took apart my vacuum and now it's not working.

Mon, 13 Mar 2023 16:07:58 -0700

The roller brush wasn’t working, so I took the vacuum apart and cleaned it. After I put the cover on the switch, the vacuum wouldn’t turn on.

⟐ Answered March 13, 2023 at 16:07 MST

Shark Navigator Repair: Can the hose be replaced from the handle

Tue, 17 Sep 2019 09:51:12 -0700

the hose from the handle to the swivel part splits alot, is there any way to replace the hose without buying the whole handle with hose part?

⟐ Commented September 17, 2019 at 9:51 MST

Shark Navigator Repair: Power Brush won't rotate

Thu, 28 Aug 2025 15:40:38 -0700

First time using the Power Brush on my new Shark Navigator, 5 stairs into it, sounded like it picked up something and the brush quit rotating. I immediately stopped, removed the tool and tried to find what was stuck. I see nothing stuck. I can't even rotate the brush by hand, if attached the belt just slips, with the wheel removed that holds the belt, I still can't get the brush to rotate by hand. I can move it maybe 1/2 inch but that's it. It's locked. The cover will only lift to about 1 o'clock if that makes sense, then it stops. The instruction book looks like it is removable and I might be able to remove it by prying it off the "pegs" on the end, but don't want to break it. Any suggestions?

I was able to get it off the pegs to remove it. I can force turn it a little more, but it still does not turn when the vacuum is on. I tried both settings just to be sure I wasn't using the wrong one. Neither makes the wheel turn.

⟐ Commented August 28, 2025 at 15:40 MST

Shark Navigator Repair: Can the latches be replaced

Tue, 26 Dec 2023 20:06:18 -0700

Can the latches be replaced?

Shark nv370

⟐ Commented December 26, 2023 at 20:06 MST

Shark Navigator Repair: Roller brush in foot is loose and makes loud noises

Wed, 30 Dec 2020 11:46:43 -0700

Hi, where can I get the foot piece of my Shark vacuum cleaner repaired - model number NV350NZ. I live in Auckland New Zealand. If can't be repaired where can I buy a replacement?

⟐ Answered December 30, 2020 at 11:46 MST

Shark Navigator Repair: Why is my power adapter on my vacuum creating a terrible racket?

Sun, 20 Aug 2017 04:59:23 -0700

When the power adapter is running, the motor makes a loud noise similar to a card in bicycle spokes only much more intense. There is nothing visibly interfering with the brushes. It is especially noticeable when pulled backwards.

⟐ Answered August 20, 2017 at 4:59 MST

Shark Navigator Repair: Need to Replace Cracked wheel

Sun, 05 Mar 2017 18:22:58 -0700

My Shark Navigator has a cracked wheel and will not spin - how do I replace with a new wheel?

⟐ Answered March 05, 2017 at 18:22 MST

Shark Navigator Repair: Why will the motor run only when handle is tilted?

Sun, 04 Feb 2024 15:40:22 -0700

Why won’t motor run while standing upright? Checked for clogs and cleaned filters

Shark Navigator Repair: Missing connector between plastic handle and metal

Fri, 24 Nov 2023 14:25:21 -0700

Some months ago I noticed the handle on my vacuum becoming very lose, rattling up and down with every push and pull. The plastic part of the handle eventually detached itself from the metal tube. I found a screw that fit and went about my work. Later I had to replace it again and this time additionally placed a grommet and washer in the metal hole. Now that has come out as well. I'm not sure if the hole in the metal is expanding or not as I didn't take pictures until now and I'm not entirely sure how it was connected in the first place. Can anyone show me their still functional piece?

Shark Navigator Repair: Seal removal on hose on canister

Sun, 12 Mar 2023 23:58:54 -0700

Hose attached on back of canister how do you remove seal to replace ripped hose