I'm posting this thread because i'm really stuck since my Galaxy tab pro S (SM-W700) get updated by Windows 10.

The previous day everything was fine, and in the evening, when i wanted to switch it off, the device displays : "Update in progress, do not turn off your computer".

So i let it work and go to bed.

The day after, when i came to use it, i got a message : "boot guard verified dxe that is fail"

Impossible to enter windows, impossible to enter the UEFI, i'm really stuck...

So any help will be welcome !

⟐ Commented December 07, 2025 at 9:31 MST

⟐ Commented March 22, 2024 at 20:36 MST

Is there any way to get further into the Tab to repair it? I already have a replacement.

Thanks in advance

i got a Samsung Galaxy TabPro S that was broken. Broken because the Tablet seems to be dead. No Charging, no flashing up anything till i opened the backcover and repluged the battery. After this i instantly have done a bios update and also i have done a clean install of Windows 10. In this case i also resized the ssd and deleted the samsung partitions on the device because i dont like the tons of hidden programs and services of samsung or other manufactures which are running in the background. But now i have the Problem that on the Tablet is the battery life extender active and set to 85%. I have tried to find any options in the Bios to set it back to 100%. Also i tryed to install all features, updates and apps of Samsung again without success.

Does anybody know how to change the batterys life extender back to 100%?

Please remember, i have no recovery of the Samsung stuff. Its just one clean partition of Windows 10 and a really short AMI Bios with no option to configurate something… something for layer-8 users i think?! What i have is the Samsung Admin Tools, but these are useless for my problem i think.

I’m able to figure out the Red and Black wire as 7.5 volts (positive and common).

The rest of the wires: White, Grey and Yellow I can’t figure them out.

I would like to have the details of these pins.

⟐ Edited April 01, 2019 at 3:54 MST

Dosen’t even seem the lcd turn up.

Just when i press the power button, bue power indicater is on and the flick of a blu light next to the sensor than nothing happens. Screen is still black.

Can it be a faulty mainboard issue?

⟐ Edited by author September 25, 2018 at 23:45 MST

Please my Samsung Galaxy Tab S2, with model SM-T810 is not charging , I have tried all the means but it is still not charging .

I received it yesterday ,fully charged.i used it till the battery level reached 29 % ,then I decided to charge it.

When I started charging it,it charged at first till I decide to put the tablet off for better charging.

Now it is no more charging .

Thanks for your help in advance.

⟐ Answer deleted September 09, 2018 at 18:59 MST

My Tab S Pro fell on the ground and now it has a noticeable but long scratch on the display is there any way to repair it?

Being a Windows tablet I thought the same method would have applied but it appears that every time the System Disabled screen is shown a new 44-digit hash is created.

According to Samsung master passwords do not exist for this unit. Samsung asks that the unit must be sent to a repair center to have it removed so I'm curious to find out how and where the password is stored? Finally what steps are taken to remove it?

Any Samsung service technicians out there able to answer this one?

⟐ Commented March 05, 2018 at 23:50 MST

I have pressed down on the power button and volume button the tablet will vibrate but nothing happens?

About the question .. I was wonder because my Ative doesnt turn on and I change the bettary and nothing happen

But I need the files inside it ! Many project on discktop file and decument .. I want to put it in my new ative

Can we have them? I cant seem find hard disk while changing bettary ..

Thank you .. I hope to seek the light

Could you please show me how to change the assembly screen?

Thank you verymuch

Best regards

Marc

⟐ Edited by author March 05, 2016 at 11:46 MST