<![CDATA[iFixit - Answers With Device "Samsung Washing Machine WA48J7700AW"]]> https://www.ifixit.com/Answers/Device/Samsung_Washing_Machine_WA48J7700AW?rss=yes en-US Sat, 04 Apr 2026 12:22:39 -0700 <![CDATA[Samsung Washing Machine WA48J7700AW: WA48H7400AW/A2 - Only fills and drains in a loop]]> I have a Samsung washing machine that will fill and drain, fill and drain, but never anything else. It never moves on to the different parts of the cycle.

I found this link very helpful:

WA48H7400AW/A2 not spinning during wash mode

I was able to get into the diagnostic modes and found the same code stored twice: E82

That points toward a MEMS sensor - which from what I've gathered has to with the vibration sensor. I'm guessing this has nothing to do with the cycles not going forward.

I also ran the quick tests:

  1. All water valves work, pumps work, lock works
  2. Spin mode goes all the way to 999RPM before shutting down
  3. 'Board Input' mode seems to show all the appropriate inputs
  4. I couldn't get the 'fast time down' test to work. I gather this, once you start a load, should move between the cycles more quickly than the standard program would do. Once I started the load, put in service mode, then pressed 'Temp.' it would beep but do nothing.

What other troubleshooting can I do to determine what could be going on?

⟐ Edited January 08, 2024 at 12:33 MST

]]> https://www.ifixit.com/Answers/View/756641/WA48H7400AW-A2+-+Only+fills+and+drains+in+a+loop https://www.ifixit.com/Answers/View/756641 Mon, 08 Jan 2024 12:33:53 -0700