iFixit - Answers With Device "Samsung WB150F"

Samsung WB150F: Why won't my camera connect to my computer?

Fri, 10 Apr 2020 20:33:44 -0700

When I plug the USB cable into my camera and then into my computer, the computer is not recognizing that the camera is connected.

⟐ Answered April 10, 2020 at 20:33 MST

Samsung WB150F: Why wont the lense come out

Sat, 22 Dec 2018 12:49:25 -0700

i go to turn my camera on but my lenes wont come out and it says "the zoom did not operate normally.insert the battery again and turn the camera on." but it dosn't change anything

⟐ Answer accepted December 22, 2018 at 12:49 MST

Samsung WB150F: Why isn’t my camera reading my memory card?

Thu, 30 Apr 2015 12:12:02 -0700

I have the memory card in its place, but it seems as though the camera is not recognizing that its there.

⟐ Answered April 30, 2015 at 12:12 MST

Samsung WB150F: How can I remove the jammed battery?

Mon, 25 Sep 2023 03:18:21 -0700

The battery is jammed in camera and is not holding a charge. I need to replace it but it is stuck in the camera. How do I go about removing the old battery and where can I get a new one?

⟐ Commented September 25, 2023 at 3:18 MST

Samsung WB150F: Why device turns off when on the Wi-Fi mode?

Mon, 10 Sep 2018 05:10:38 -0700

When I go on Wi-Fi and pick one of the opitions, for example Facebook, screens goes black and camera turns off. Why is that?

⟐ Answer accepted September 10, 2018 at 5:10 MST

Samsung WB150F: Repair damaged card slot, get card error, when card was put into slot.

Tue, 28 Nov 2017 20:29:57 -0700

Card sticks in slot. Will not come out without force. Can slot be replaced? Email address: hendersonc14@yahoo.com.

⟐ Answer accepted November 28, 2017 at 20:29 MST

Samsung WB150F: Why does my camera on zoom say the zoom did not work normally.

Thu, 12 Nov 2020 06:43:07 -0700

it tells me to insert the battery again and turn the camera on. It says if the camera does not operate normally do not put excessive pressure on it and contact the service center

Samsung WB150F: The ok button on back moves on it own fix how?

Sat, 19 Oct 2019 17:22:37 -0700

The button with the ok in the center won't let me move the courser to make a selection but when I do get it to work it just randomly flashes through all the categories and won't let me select. Can I fix this?

Samsung WB150F: Flash has stopped working.

Sun, 20 Aug 2017 08:13:55 -0700

How can I get my flash repaired?

Samsung WB150F: camera shutter is broken

Sun, 05 Feb 2017 16:10:20 -0700

my shutter is broken on my camera. where can I get it fixed?

Samsung WB150F: damage to memory card slot. can it be repaired?

Mon, 16 Jan 2017 18:56:13 -0700

memory chip installed incorrectly. damaged slot. can it be repaired?Memory

Samsung WB150F: My camera gives weak flash light

Tue, 06 Sep 2016 05:49:02 -0700

when i press my samsung camera to takw apicture the flash light is very weak please tell me what is the reason of this weak

⟐ Edited by author September 06, 2016 at 5:49 MST

Samsung WB150F: when my camera turns on it says connicting to computer

Wed, 10 Feb 2016 17:52:27 -0700

when my camera turns on it says connicting to computer but its not connected then it turns off

Samsung WB150F: Camera Samsung WB-150F Full over exposure at all light environments

Fri, 21 Aug 2015 23:04:59 -0700

My Samsung WB-150F will dramatically over exposure all the pictures. May the opening be stuck full open? Only at low light, the shots seem to set to an acceptable light level (at level of not giving a full saturation = totally white screen).

1 Measurement error?

Does the light measurement with this camera go through the lens and does the measurement use the picture cell (or part of it) for the light measurement?

Or does it have a separate light sensor?

2 Stuck opening?

If the control of the opening does not work, May there be any ideas how first to witness it and then how to try to fix it?

After sleeping overnight:

Discovered, that at manual setting the display seems to darken and lighten according to shutter speed and opening settings. - means, that the speed and opening settings will function well. However, the shots get over exposed in spite of display just before the shot show a well adjusted brigthness.

In additio to that the video seem to work at least a bit better.

The problem was caused due to the moisture.

⟐ Edited August 21, 2015 at 23:04 MST